References
[1]ORTON S L,CHIARITO V P,MINOR J K,et al.Experimental testing of CFRPStrengthened reinforced concrete slab elements loaded by close-in blast[J].Journal of Structural Engineering,2014,140(2):1612-1625.
[2]HENRYCH J,MAJOR R.The dynamics of explosion and its use[M].Amsterdam:Elsevier,1979.
[3]VARMA R K,TOMAR C P S,PARKASH S,et al.Damage to brick masonry panel walls under high explosive detonations[C]//Presented at the ASME Pressure Vessels and Piping Conference.Orlando,Florida,1997,351:207-216.
[4]WEI X Y,STEWART M G.Model validation and parametric study on the blast response of unreinforced brick masonry walls[J].International Journal of Impact Engineering,2010,37(11):1150-1159.
[5]MICHALOUDIS G,GEBBEKEN N.Modeling masonry walls under far-field and contact detonations[J].International Journal of Impact Engineering,2019,123:84-97.
[6]DAVIDSON J S,PORTER J R,DINAN R J,et al.Explosive testing of polymer retrofit masonry walls[J].Journal of Performance of Constructed Facilities,2004,18(2):100-106.
[7]DAVIDSON JS,FISHER J W,HAMMONS M I,et al.Failure mechanisms of polymerreinforced concrete masonry walls subjected to blast[J].Structure Engineering,2005,131(8):1194-1205.
[8]DAVIDSON J S,MORADI L,DINAN R J.Selection of a material model for simulating concrete masonry walls subjected to blast[R].DTIC Document,2004.
[9]DAVIDSON J S,SUDAME S,DINAN R J.Development of computational models and input sensitivity study of polymer reinforced concrete masonry walls subjected to blast[R].DTIC Document,2004.
[10]WANG J G,REN H Q,WU X Y,et al.Blast response of polymer-retrofitted masonry unit walls[J].Composites Part B:Engineering,2017,128:174-181.
[11]WANG J G.Experimental and numerical investigation of clay brick masonry walls strengthened with spray polyurea elastomer under blast loads[D].Hefei:University of Science and Technology of China,2017.
[12]SHI Y C,XIONG W,LI Z X,et al.Experimental studies on the local damage and fragments of unreinforced masonry walls under close-in explosions[J].International Journal of Impact Engineering,2016,90:122-131.