1)Introduction of Body Control Function
(1)Hint Function
➢Door Opening:If any door opens when the power is on,the buzzer sounds twice.
➢Key Learning Successfully:Every time one key is learned successfully,the buzzer sounds once.
➢Anti-theft Off:When the whole car is off,and the anti-theft is activated,if the remote control is unlocked,it means the system has been out of anti-theft,and at this moment,the direction indicator lamp flickers quickly four times and the buzzer sounds four times.
➢Light is on:If the key is plugged out,but the light switch is still on,open the main driver door,the buzzer will keep sounding unless the door is closed or the light is turned off.
➢Key Unplugged:If the key is in ACC or LOCK position,open the main driver door,the buzzer will sound six times.
➢Following Home:When the power is off,start“Following Home”,the buzzer will sound once.
(2)Warning Function
Back Door Not Closed:when the power of the whole car is off,the back door is not closed(four doors are closed),use the remote control to lock,the front four doors are being locked,meanwhile,the direction indicator lamp flickers four times.(https://www.daowen.com)
Door Not Closed:when the power is off,open any door(back door is not included),use the remote control to lock,the doors are locked first and then unlocked,meanwhile,the direction indicator lamp flickers four times;When the power is in any position,there is a door not being closed(back door is not included),press the central control lock,unlock first and then lock.
(3)Car-finding Function.
Press the lock key of the same remoting control key twice in 2 s to start 25 s direction indicator lamp flicking hint.
(4)“Follow Home”Function.
When the power of the whole car is off,and the key is plugged out,turn off light switch in 2 s→clearance lamp side light→headlight→clearance lamp side light→OFF,then“Follow Home”function is activated and the light goes off after extending 1 minute and if there is a door opened,3 minutes are delayed.
(5)Daytime Running Light(Luxury Type,Prestige Type)
➢When the power is ON or ST;
➢The position light is off.
The daytime running light illuminate when the above two requirements are fulfilled.Otherwise,it will go out.