5.Skill Training
1)Inspection of Light Switch
Take turn light for example,and check the conductive condition of terminal.Finish Table 3.4.
Table 3.4 The Conductive Condition of Turn Light Terminal
2)BCM Signal Inspection
Take turn light for example,and inspect the BCM control signals.Finish Table 3.5.(https://www.daowen.com)
Table 3.5 Inspect the BCM Control Signals
3)Circuit Inspection
Based on the circuit inspection,judge whether the wire connection is good or not and if not,you also need to write down the diagnostic fault.
□Yes/□No_________________________________________________________________
