Entertainment System Update
1)General Description Before Updating
The teaching material is used to instruct users how to use U drive to update the software of main frame and add-on equipment.The updating subjects include:main frame OS,MCU and APP;
·Before updating,check the software version of the equipments in the car(Enter the main interface,and click“Setting---Auxiliary(at the lower right corner)---Version No.”),as shown in Fig.3.29.
·Don’t switch off the motor during the whole updating process.
·Before updating,check the present software version of the equipments and if not all the software need updating,then choose the target software to update.
Note:Using the software with low-level configuration to update the main frame with high-level configuration will cause the breakdown of main frame.
Fig.3.29 Version Number Information
2)Download the Software
(1)Log in“Product Software Update Remote Downloading Service System”as shown in Fig.3.30.
①The website is http://116.6.52.28:9000/Login.aspx,input the user name:长安商用and password:cahbs**103,and then click the“Log in”to log in.
②The website is http://116.6.52.28:9000/Login.aspx,and enter directly to download the relative data(Comfortable type adopts low-level configuration and luxury type adopts high-level configuration).
Fig.3.30 Software Downloading Page
(2)On the popped software update downloading interface,choose the corresponding data package according to the vehicle type and after clicking the right download button,finish the downloading of data package as shown in Fig.3.31.
Fig.3.31 Software Downloading Link
(3)After downloading the compression package of CX70,the data package is 138M,including 12 files and 6 folders in total as shown in Fig.3.32.
Fig.3.32 Data File
3）Update the Software
(1)When the key is turned off,insert U drive into the front USB connector.
(2)Turn the key to ACC,and the image as shown in Fig.3.33 appears on the DVD screen.Click“Press Here to Update”and click“OK”on the popped dialog box,as shown in Fig.3.34.
Fig.3.33 APP and MCU Updating Interface Interface
Fig.3.34 Warning
Note:Don’t cut off the power or insert or unplug the U drive during the updating process！(https://www.daowen.com)
(3)After clicking“OK”,the target items will update automatically and the progress bar changes quickly and you just need to wait for the automatic completion of updating.APP updating is shown in Fig.3.35 and MCU updating is shown in Fig.3.36.
Fig.3.35 APP Updating
Fig.3.36 MCU Updating
(4)After the completion of MCU and APP updating,the main frame will reboot automatically.When the reboot Logo appears on the interface of main frame,unplug the U drive.If the U drive is not unplugged in time,the main frame will enter the updating interface of MCU and APP again,and at this moment,if you want to unplug the U drive,turn the key back to the“Off”position and then“ACC”position so that DVD is restarted again.
(5)Enter the main interface after DVD is restarted and then click“Setting”,as shown in Fig.3.37.After entering the“Setting”interface,click“System—Time/Date—Set Time”,as shown in Fig.3.38.
Fig.3.37 Click the“Setting”
Fig.3.38 Set up the Date
(6)Set the date as“2099-10-18”,as shown in Fig.3.39.When clicking“Confirm”,enter the“Factory Set”,and then choose the system firmware updating-OS updating,as shown in Fig.3.40.
Fig.3.39 Set up the Date
Fig.3.40 Choose OS Updating
Note:Don’t cut off the power or insert or unplug the U drive during the updating process!
(7)After choosing OS updating,the hint“Please make sure that OS updating file has been put in the designated catalogue in the U drive”,as shown in Fig.3.41.At this moment,insert the U drive into the front USB connector and wait for the next step.Click“Confirm”on the popped OS updating dialog box,as shown in Fig.3.42,and then wait for the completion of updating.
Fig 3.41 OS Updating Hint
Fig.3.42 OS Updating
8．DVD will reboot automatically.When DVD reboots,unplug the U drive immediately.If there appears updating interface,please turn the key back to“Off”position,then to“ACC”position,so that DVD reboot again.
Note:After the completion of updating,if APP or WIFI is found missing,please refurnish the software with high configuration.
(9)Click the“Setting”on the main interface,and choose the“Auxiliary”,then after choosing the version No.,you can check whether the software version No.updating is finished or not by sliding up and down,as shown in Fig.3.43.
Fig.3.43 Version Number Confirmation after Updating