(6)Selection criteria for protective clothing(PPE)
Medical protective clothing shall have the following standards.
1)Surface moisture resistance:The liquid barrier level of the protective clothing should not be lower than the level 3 requirements in GB/T 4745—1997.
2)Breaking strength:The breaking strength of the PPE sample should be>45N.
3)Elongation at break:The elongation at break of the PPE sample is>30%.
4)Filtration efficiency:The filtering efficiency of PPE for non-oily particles is>70%(https://www.daowen.com)
5)Flame retardant:Protective clothing with flame retardant properties shall meet the requirements of Class B2 in GB 17591—1998.
6)Antistatic:Charge of PPE should be<0.6 μC.
7)Skin irritation:The material of PPE must not cause skin irritation.
8)Microbiological indicators:PPE should meet the requirements of GB 19082—2009 for microbiological indicators.PPE should be marked with the words“sterilized”or“sterile”on the packaging or shown on the diagram should be sterile.