4.4.2 Main Technical Requirements for Live Working...
1.General Requirements
①General requirements for tool storage compartment.
a.Space.The minimum dimensions of the tool storage compartment are shown in Table 4-3.
Table 4-3 Minimum Dimensions of Tool Storage Compartment mm

b.The tool storage compartment is enclosed and shall have a thermal insulation layer with a sealing strip attached to the door.The tool storage compartment shall be provided with grounding device.
c.The fire protection,lighting and decoration materials of the storage compartment for tools and instruments shall meet the relevant requirements of the Live Working Tool Special Vehicle(GB25725-2010).
②Storage rack for tools and instruments
It is necessary to meet the relevant requirements of the Live Working Tool Special Vehicle(GB2725—2010).The internal structure of the live working tool special vehicle is shown in Fig.4-30.

Fig.4-30 Internal Structure of Live Working Tool Special Vehicle(https://www.daowen.com)
2.Temperature and Humidity Requirements
①Temperature
a.The live working tools shall be stored according to the type of tool,and each storage area can have different temperature requirements.Metal There is no requirement on the tool storage.
b.The temperature in the storage areas of hard insulating tools,soft insulating tools,testing tools,and shielding tools shall be controlled within 5-40°C.
c.The temperature of the storage areas of the insulating shielding device and the insulating protective device shall be controlled within 10-28°C.
d.The temperature of Type I vehicle shall be controlled with 5-40°C.
e.The temperature of Type II&III vehicles shall be controlled within 10~28°C.
②Humidity
The humidity in the tool storage compartment shall be not more than 60%.
3.Equipment Requirements
Dehumidification equipment,drying equipment,ventilation equipment,temperature and humidity control equipment,alarm equipment,video monitoring equipment and other equipment shall meet the relevant requirements of Live Working Tool Special Vehicle(GB25725—2010).