参考文献

参考文献

[1]Wallace W,Hoeppner DW,Kandachar PV(1985)AGARD corrosion handbook,vol 1,aircraft corrosion:causes and case histories.AGAR Dograph AGARD-AG-278,Advisory Group for Aerospace Research and Development,Neuilly-sur-Seine,France.

[2]Benavides S(ed)(2009)Corrosion control in the aerospace industry.Woodhead Publishing Limited,Cambridge,UK.

[3]Dunn B D(2016)Materials and processes for spacecraft and high reliability applications.Springer International Publishing,Springer Praxis Books,Chichester,UK.

[4]Korb L J,Franklin D B(1987)Corrosion in the aerospace industry.In:Metals handbook ninth edition,vol 13,Corrosion.ASM International,Materials Park,OH 44073-0002,USA,pp 1058-1100(Korb)and pp.1101-1106(Franklin).

[5]Wanhill R J H,Byrnes R T,Smith C L(2011)Stress corrosion cracking in aerospace vehicles,Chapter 16.In:Raja VS,Shoji T(eds)Stress corrosion cracking:theory and practice.Woodhead Publishing Limited,Cambridge,UK,pp.608-650.

[6]RTO/NATO(2011)Corrosion fatigue and environmentally assisted cracking in aging military vehicles,AGAR Dograph AGAVT-140,Research and Technology Organisation RTO/NATO,Neuilly-sur-Seine,France.

[7]Paone M L(1993)The corrosion challenge:the impact of corrosion maintenance programs.Mater Eval 51(12):1373-1376.

[8]Akdeniz A(2001)The impact of mandated aging airplane programs on jet transport airplane scheduled structural inspection programs.Aircraft Eng Aerosp Technol 73(1):4-15.

[9]NTSB(1989)Aircraft accident report,Aloha Airlines,Flight 243,Boeing 737-200,N73711,Near Maui,Hawaii,April 28,1988,NTSB report no.NTSB/AAR-89/03,National Transportation Safety Board,Washington,DC,USA.

[10]Kool G A,Kolkman H J,Wanhill R J H(1994)Aircraft crash caused by stress corrosion cracking,American Society of Mechanical Engineers Paper 94-GT-298,International gas turbine and aeroengine congress and exposition,13-16 June 1994,The Hague,The Netherlands.

[11]Weiss S P(1973)Apollo experience report—lunar module structural subsystem,NASA Technical Note NASA TN D-7084,National Aeronautics and Space Administration,Washington,D.C.20546,USA.

[12]Johnson R E(1973)Apollo experience report—the problem of stress-corrosion cracking,NASA Technical Note NASA TN D-7111,National Aeronautics and Space Administration,Washington,DC 20546,USA.

[13]Pedley M D(2009)Materials and processes selection,control,and implementation plan for JSC flight hardware,NASA JSC 27301F,Section 5.2,structural engineering division.National Aeronautics and Space Administration Lyndon B.Johnson Space Center,Houston,TX 77058,USA.

[14]ASM Committee on Corrosion of Weld ments(1987)Corrosion of weld ments.In:Metals handbook ninth edition,vol 13,Corrosion.ASM International,Materials Park,OH 44073-0002,USA,pp.344-368.

[15]Heinimann M,Kulak M,Bucci R,et al(2007)Validation of advanced metallic hybrid concept with improved damage tolerance capabilities for next generation lower wing and fuselage applications.In:Lazzeri L,Salvetti A(eds)ICAF 2007—Durability and damage tolerance of aircraft structures:metals vs composites(Pacini,Naples,Italy),vol 1,pp.206-223.

[16]Dubois T(2007)New materials in business aircraft:composites,metals vie for supremacy.Aviation International News,March 2007,pp.50-54.

[17]ArbegastW J,Hartley P(1999)Friction stirweld technology development at Lockheed Martin Michoud Space System—an overview.In:Vitek JM,David SA,Johnson JA,Smartt H B,DebRoy T(eds)Proceedings of the international conference on trends in welding research.ASM International,Materials Park,OH 44073-0002,USA,pp.541-546.

[18]Windisch M(2009)Damage tolerance of cryogenic pressure vessels,European Space Agency ESA technology and research program me report ESA TRP DTA-TN-A250041-0004-MT,European Space Agency ESA/ESTEC,Noordwijk,TheNetherlands.

[19]National Aeronautics and Space Administration(2010)Orion:America's next generation spacecraft,NASA Publication NP-2010-10-025-JSC,NASA Lyndon B.Johnson Space Center,Houston,TX 77058,USA.

[20]Niedzinski M,Thompson C(2010)Airware 2198 backbone of the Falcon family of SpaceX launchers.Light Metal Age 68,December 2010,pp.6-7,55.

[21]Hales S J,Tayon W A,Domack M S(2012)Frictionstir-welded and spin-formed end domes for cryogenic tanks,NASA Report NF1676L-13613,NASA Langley Research Center,Hampton,VA 23681,USA.

[22]Wanhill R JH(2014)Aerospace applications of aluminiumlithium alloys,Chapter 15.In:Eswara Prasad N,Gokhale AA,Wanhill R J H(eds)Aluminum-Lithium alloys:processing,properties and applications,Butter worth-Heine mann,Elsevier,Inc.,Oxford,UK,pp.503-535.

[23]Padovani C G,Davenport A J,Connolly B J,et al(2008)Corrosion and protection of friction stir welds in aerospace aluminium alloys,La Metallurgia Italiana,Oct 2008,pp.29-42.

[24]Threadgill P L,Leonard P L,Shercliff H R,et al(2009)Friction stir welding of aluminium alloys.Int Mater Rev 54(2):49-93.

[25]Hu W,Efstathios IM(2000)Corrosion and environ mentassisted cracking behavior of friction stir welded Al2195 and Al 2219 alloys.Mater Sci Forum 331-337:1683-1688.

[26]Metal Corrosion in the Atmosphere(1968)ASTM special technical publication no.435,American Society for Testing and Materials,Philadelphia,PA 19103,USA.

[27]Romans H B,Craig H L Jr(1968)Atmospheric corrosion testing of aluminum alloys.In:Metal corrosion in the atmosphere,ASTM special technical publication no.435.American Society for Testing and Materials,Philadelphia,PA 19103,USA,pp.61-82.

[28]Brandt S M,Adam L H(1968)Atmospheric exposure of light metals.In:Metal Corrosion in the Atmosphere,ASTM special technical publication no.435.American Society for Testing and Materials,Philadelphia,PA 19103,USA,pp.95-128.

[29]McGeary F L,Summerson T J,Ailor W H Jr(1968)Atmospheric exposure of nonferrous metals and alloys—aluminum:seven-year data.In:Metal corrosion in the atmosphere,ASTM special technical publication no.435.American Society for Testing and Materials,Philadelphia,PA 19103,USA,pp.141-174.

[30]Carter V E(1968)Atmospheric corrosion of aluminum and its alloys:results of six-year exposure tests.In:Metal corrosion in the atmosphere,ASTM special technical publication no.435.American Society for Testing and Materials,Philadelphia,PA 19103,USA,pp.257-270.

[31]AilorW H Jr(1968)Performance of aluminum alloys at other test sites.In:Metal corrosion in the atmosphere,ASTM special technical publication no.435.American Society for Testing andMaterials,Philadelphia,PA 19103,USA,pp.285-307.

[32]Thompson D H(1968)Atmospheric corrosion of copper alloys.In:Metal corrosion in the atmosphere,ASTM special technical publication no.435.American Society for Testing and Materials,Philadelphia,PA 19103,USA,pp.129-140.

[33]Mattsson E,Lindgren S(1968)Hard-rolled aluminum alloys.In:Metal corrosion in the atmosphere,ASTM special technical publication no.435.American Society for Testing and Materials,Philadelphia,PA 19103,USA,pp.240-256.

[34]Briggs CW(1968)Atmospheric corrosion of carbon and low alloy cast steels.In:Metal corrosion in the atmosphere,ASTM special technical publication no.435.American Society for Testing and Materials,Philadelphia,PA 19103,USA,pp.271-284.

[35]Carter V E,Campbell H S(1968)The effect of initial weather conditions on the atmospheric corrosion of aluminum and its alloys.In:Metal corrosion in the atmosphere,ASTM special technical publication no.435.American Society for Testing and Materials,Philadelphia,PA 19103,USA,pp.39-42.

[36]Calle LM(2009)Corrosion control in space launch vehicles,Chapter 9.In:Benavides S(ed)Corrosion control in the aerospace industry.Woodhead Publishing Limited,Cambridge,UK,pp.195-224.

[37]Calle LM(2014)NASA's corrosion technology at the Kennedy Space Center:anticipating,managing and preventing corrosion.In:2014 international workshop on environ ment and alternativeenergy,21-24 Oct2014,PPT Document KSC-E-DAATN18212,NASA Kennedy Space Center,Cocoa Beach,FL 32899,USA.

[38]Calle LM(2015)NASA's corrosion technology at the Kennedy Space Center:anticipating,managing and preventing corrosion,Report KSC-E-DAA-TH24705,NASA Kennedy Space Center,Cocoa Beach,FL 32899,USA.

[39]Montgomery E L,Calle L M,Curran J C,et al(2012)Timescale correlation between marine atmospheric exposure and accelerated corrosion testing—part 2.In:Corrosion conference and expo 2012,National Association of Corrosion Engineers.NACE International,Houston,TX,USA,vol 7,pp.5655-5671.

[40]Iverson W P(1987)Microbial corrosion ofmetals.In:Laskin AL(ed)Advances in applied microbiology.Academic Press Inc.,Harcourt Brace Jovanovich,Orlando,FL 32887,USA,vol32,pp.1-36.

[41]Videla H A,Herrera L K(2005)Microbiologically influenced corrosion:looking to the future.International Microbiology 8:169-180.

[42]Passman F J(2013)Microbial contamination and its control in fuels and fuel systems since 1980—a review.Int Biodeterior Biodegradation 81:88-104.

[43]Yang S S,Lin J Y,Lin Y T(1998)Microbiologically induced corrosion of aluminum alloys in fuel-oil/aqueous system.JMicrobiol Immunol Infect31(3):151-164.

[44]Rajasekar A,Ting Y-P(2010)Microbial corrosion ofAluminum 2024 aeronautical alloy by hydrocarbon degrading bacteria Bacillus cereus ACE4 and Serratiamarcescens ACE2.Ind Eng Chem Res 49(13):6054-6061.

[45]Holroyd N JH,Scamans G M,Newman R C,et al(2014)Corrosion and stress corrosion in aluminum-lithium alloys,Chapter 14.In:Eswara Prasad N,Gokhale AA,Wanhill R JH(eds)Aluminum-lithium alloys:processing,properties and applications.Butter worth Heinemann,Elsevier,Inc.,Oxford,UK,pp.457-500.

[46]Wanhill R JH(1989)Spacecraft sustained load fracture control,European space agency contract no.AO/2-1162 NL/PH:NLR Technical Publication NLR TP 89163 U,National Aerospace Laboratory NLR,Amsterdam,The Netherlands.

[47]Wanhill R J H(1991)Spacecraft sustained load fracture control.In:Proceedings of international conference spacecraft structures and mechanical testing,ESTEC,24-26 April 1991,ESA SP-321,vol2,pp.543-549,European Space Agency,Paris,France.

[48]Wanhill R JH(1991)Fracture control guidelines for stress corrosion cracking of high strength alloys,NLR Technical Publication NLR TP 91006 U,National Aerospace Laboratory NLR,Amsterdam,The Netherlands.

[49]Wanhill R J H(2007)Aircraft stress corrosion in the Netherlands:1965-2007,NLR Technical Publication NLRTP-2009-520,National Aerospace Laboratory NLR,Amsterdam,The Netherlands.

[50]National Aeronautics and Space Administration(2005)Guidelinesfor the selection ofmetallic materials for stress corrosion cracking resistance in sodium chloride environments,NASA EM30,MSFC-STD-3029,Revision A,George C.Marshall Space Flight Center,Huntsville,AL 35812,USA.

[51]European Cooperation for Space Standardization(2009)Determination of the susceptibility ofmetals to stress-corrosion cracking,European Space Agency ECSS-Q-ST-70-37C,ESA Requirements and Standards Division,Noordwijk,The Netherlands.

[52]Staehle R W,Forty A J,Van Rooyen D(eds)1969,Fundamental aspects of stress corrosion cracking.NACE-1,National Association of Corrosion Engineers,NACE International,Houston,TX 77084,USA.

[53]Davis J R(ed)(1999)Chapter 7.In:Corrosion of aluminum and aluminum alloys.ASM International,Materials Park,OH 44073-0002,USA.

[54]Brown B F(1966)A new stress-corrosion cracking test for high-strength alloys.Mat Res Stand 6(3):129-133.

[55]Brown B F(ed)(1972)Stress-corrosion cracking in high strength steels and in titanium and aluminum alloys,Naval Research Laboratory,Washington,D.C.20375,U.S.Government Printing Office,Washington,D.C.20402,USA.

[56]Sprowls D O,Shumaker M B,Walsh J D,et al(1973)Evaluation of stress-corrosion cracking susceptibility using fracture mechanics techniques,ALCOA Final Report—PartⅠ,Contract No.NAS 8-21487,George C.Marshall Space Flight Center,Huntsville,AL 35812,USA.

[57]Wanhill R J H(1975)Aqueous stress corrosion in titanium alloys.Br Corros J 10(2):69-78.

[58]Brown B F(1975)Stress corrosion cracking control measures,National Bureau of Standards NBSMonograph 156,U.S.Government Printing Office,Washington,D.C.20402,USA.

[59]Judy RW Jr,Goode R J(1972)Stress-corrosion cracking of high-strength steels and titanium alloys.Weld J 51(9):437s-448s.

[60]Judy RW Jr,Goode R J(1975)Standard method of test for plane-strain stress corrosion cracking resistance of metallic materials,Naval Research Laboratory Report 7865,Naval Research Laboratory,Washington,D.C.20375,USA.

[61]Wei R P,Novak SR,Williams D P(1972)Some important considerations in the development of stress corrosion cracking testmethods.Mat Res Stand 12(9):25-30.

[62]Janssen M,Zuidema J,Wanhill R JH(2002)Chapter 10.In:Fracture Mechanics,Second Edition.Delft University Press,Delft,The Netherlands.

[63]European Cooperation for Space Standardization(2009)Material selection for controlling stress-corrosion cracking,European Space Agency ECSS-Q-ST-70-36C,ESA Requirements and Standards Division,Noordwijk,The Netherlands.

[64]Franklin D B(1977)Design criteria for controlling stress corrosion cracking,Marshall Space Flight Center Document MSFC-SPEC-522A,November 1977,George C.MarshallSpace Flight Center,Huntsville,AL 35812,USA.

[65]Franklin D B(1987)Design criteria for controlling stress corrosion cracking,Marshall Space Flight Center Document MSFC-SPEC-522B,July 1987,George C.Marshall Space Flight Center,Huntsville,AL 35812,USA.

[66]Humphries T S(1963)Stress corrosion of high-strength aluminum alloys,NASAMTP-P＆VEM-63-8,June 1963,George C.Marshall Space Flight Center,Huntsville,AL 35812,USA.

[67]Lifka BW,Sprowls DO,Kelsey R A(1972)Investigation of smooth specimen SCC test procedures.Variations in environment,specimen size,stressing frame,and stress state,ALCOA Final Report—PartⅡ,Contract No.NAS 8-21487,George C.Marshall Space Flight Center,Huntsville,AL 35812,USA.

[68]Humphries T S,Nelson E E(1973)Synthetic sea water—an improved stress corrosion test medium for aluminum alloys,NASA Technical Memorandum NASA TM X-64733,March 1973,George C.Marshall Space Flight Center,Huntsville,AL 35812,USA.

[69]Humphries T S,Nelson E E(1981)Seacoast stress corrosion cracking of aluminum alloys,NASA Technical Memorandum NASA TM-82393,January 1981,George C.Marshall Space Flight Center,Huntsville,AL 35812,USA.

[70]Humphries T S,Coston J E(1981)An improved stress corrosion test medium for aluminum alloys,NASA Technical Memorandum NASA TM-82452,November 1981,GeorgeC.Marshall Space Flight Center,Huntsville,AL 35812,USA.

[71]Williamson JG(1965)Stress corrosion studies of AM-355 stainless steel,NASA Technical Memorandum NASA TM X-53317,August1965,George C.Marshall Space Flight Center,Huntsville,AL 35812,USA.

[72]Humphries TS,Nelson E E(1969)Stress corrosion cracking evaluation of several precipitation hardening stainless steels,NASA Technical Memorandum NASA TM X-53910,September 1969,George C.Marshall Space Flight Center,Huntsville,AL 35812,USA.

[73]Humphries T S,Nelson E E(1970)Stress corrosion cracking evaluation of several ferrous and nickel alloys,NASA Technical Memorandum NASA TM X-64511,April 1970,George C.Marshall Space Flight Center,Huntsville,AL 35812,USA.

[74]Montano J W(1972)A mechanical property and stress corrosion evaluation of Custom 455 stainless steel alloy,NASA Technical Memorandum NASA TM X-64682,August 1972,George C.Marshall Space Flight Center,Huntsville,AL 35812,USA.

[75]Montano J W(1973)A mechanical property and stress corrosion evaluation of 431 stainless steel alloy,NASA Technical Memorandum NASA TM X-64729,March 1973,George C.Marshall Space Flight Center,Huntsville,AL 35812,USA.

[76]Montano JW(1976)The stress corrosion resistance and thecryogenic temperaturemechanical behavior of18-3Mn(Nitronic 33)stainless steel parent and welded material,NASA Technical Memorandum NASA TM X-73309,June 1976,George C.Marshall Space Flight Center,Huntsville,AL 35812,USA.

[77]Montano JW(1977)The stress corrosion resistance and the cryogenic temperature mechanical properties of annealed Nitronic 60 bar material,NASA Technical Memorandum NASA TM X-73359,Jan 1977,George C.Marshall Space Flight Center,Huntsville,AL 35812,USA.

[78]Humphries TS,Nelson E E(1980)Stress corrosion cracking evaluation of martensitic precipitation hardening stainless steels,NASA Technical Memorandum NASA TM-78257,January 1980,George C.Marshall Space Flight Center,Huntsville,AL 35812,USA.

[79]Montano JW(1986)A torque,tension,and stress corrosion evaluation of high strength A286 bolts,NASA Technical Memorandum NASA TM-86539,February 1986,George C.Marshall Space Flight Center,Huntsville,AL 35812,USA.

[80]Denhard E E Jr(1967)Stress corrosion cracking of high strength stainless steels,Paper5 in Stress corrosion cracking in aircraft structural materials,AGARD conference proceedings no.18,Advisory Group for Aerospace Research and Development,Neuilly-sur-Seine,France.

[81]Rhode TM(1986)Revision of design values for7075-T7351 and 7075-T7651 aluminum plate,Air Force Wright AeronauticalLaboratories Technical Report AFWAL-TR-86-4100,December 1986,Wright-Patterson Air Force Base,OH 45433-6533,USA.

[82]Sprowls D O,Brown R H(1962)Resistance of wrought highstrength aluminum alloys to stress corrosion,Technical Paper no.17,Aluminum Company of America,Pittsburgh,PA 15212,USA.

[83]Sprowls D O(1972)Progress toward standardization of SCC test techniques by the National Association of Corrosion Engineers and the Aluminum Association,Paper 3 in Specialists meeting on stress corrosion testing methods,AGARD conference proceedings no.98,Advisory Group for Aerospace Research and Development,Neuilly-sur-Seine,France.

[84]Cataldo C E(1966)Stress corrosion.In:Materials research at MSFC:research achievements review,volⅡ,Report no.4,NASA Technical Memorandum TM X-53610,National Aeronautics and Space Administration,Washington,D.C.20546,USA.

[85]Lisagor W B,Manning C R Jr,Bales T T(1968)Stress corrosion cracking of Ti-6Al-4V titanium alloy in nitrogen tetroxide,NASA technical note NASA TN D-4289,National Aeronautics and Space Administration,Washington,D.C.20546,USA.

[86]Coburn S(1978)Atmospheric corrosion.In:Metals handbook ninth edition,vol 1,Properties and selection—irons and steels.ASM International,Materials Park,OH 44073-0002,USA,p.720.

[87]Humphries T S,Nelson E E(1980)Evaluation of the stress corrosion cracking resistance of several high strength low alloy steels,NASA Technical Memorandum NASA TM-78276,May 1980,George C.Marshall Space Flight Center,Huntsville,AL 35812,USA.

[88]Kain R M(1987)Evaluation of crevice corrosion.In:Metals handbook ninth edition,vol 13,Corrosion.ASM International,Materials Park,OH 44073-0002,USA,pp.303-310.

[89]Calle L M,Kolody M R,Vinje R D,et al(2004)Electrochemical impedance spectroscopy of alloys in a simulated Space Shuttle launch environment.In‘EIS 2004,6th international symposium on electrochemical impedance spectroscopy,16-21 May 2004,NASA Kennedy Space Center,Cocoa Beach,FL 32899,USA:https://corrosion.ksc.nasa.gov/pubs/153.pdf.

[90]Symposium on atmospheric exposure tests on non-ferrous metals(1946)ASTM special technical publication no.67,American Society for Testing and Materials,Philadelphia 3,PA,USA.

[91]Symposium on atmospheric corrosion of non-ferrous metals(1955)ASTM special technical publication no.175,American Society for Testing and Materials,Philadelphia 3,PA,USA.

[92]Dix E H Jr,Mears R B(1946)The resistance of aluminumbase alloys to atmospheric exposure.In:Symposium on atmospheric exposure tests on non-ferrous metals,1946,ASTM special technical publication no.67.American Society for Testing andMaterials,Philadelphia 3,PA,USA,pp.57-71.

[93]Dean SW,Anthony W H(1988)Atmospheric corrosion of wrought aluminum alloys during a ten-year period.In:Dean SW,Lee TS(eds)Degradation ofmetals in the atmosphere,ASTM special technical publication 965.American Society for Testing and Materials,Philadelphia,PA 19103,USA,pp.191-205.

[94]Morrison JD(1980)Report on relative corrosivity of atmospheres at various distances from the seacoast,NASA ReportMTB 099-74,January 1980,John F.Kennedy Space Center,FL 32899,USA.

[95]Calle L M,MacDowell L G(2003)35 years of corrosion protection at the Kennedy Space Center,Paper03208 presented at the NACE Corrosion/2003,March 2003,San Diego,CA,USA:https://corrosion.ksc.nasa.gov/35year.htm.

[96]Calle L M,Curran J C,Kolody M R,et al(2013)The behavior of environmentally friendly corrosion preventive compounds in an aggressive coastal marine environment.In:Corrosion conference and expo 2013,National Association of Corrosion Engineers,vol 4.NACE International,Houston,TX,USA,pp.3526-3541.

[97]Calle LM,LiW,Buhrow JW,etal(2016)Smart coatings for corrosion protection,Oral/visual presentation at Jornada Internacional De Investigacion Cientifica:‘Ciencia y Technologia a la Vanguardia de Mexico',November 2016,Campeche,Mexico:https://ntrs.nasa.gov/search.jsp?R=20160013624.

[98]Rioja R J,Liu J(2012)The evolution of Al-Li baseproducts for aerospace and space applications.MetallMat Trans A 43A:3325-3337.

[99]Schmidt T,Yocum L,Bush D,et al(2012)Advanced aluminum alloys enabling performance improvements,Joint armaments conference,14-17 May 2012,Seattle,WA 98104,USA.

[100]NiedzinskiM,Ebersolt D,Schulz P(2013)Review of Airware alloys currently used for space launchers,Presentation FCTIM-2013-s8-02-Niedzinski-Ebersolt,Workshop:Technical interchange meeting(TIM)on fracture control of spacecraft,launchers and their payloads and experiments,20-21March 2013,ESA/ESTEC,Noordwijk,The Netherlands.

[101]Denzer D K,Rioja R J,Bray G H,et al(2012)The evolution of plate and extruded products with high strength and toughness.In:Weiland H,Rollett AD,Cassada WA(eds)Proceedings of the 13th international conference on aluminum alloys(ICAA13).The Minerals,Metals and Materials Society(TMS)and Wiley,Hoboken,New Jersey,USA,pp.587-592.

[102]Henon C,Rouault R(2012)Comparison of corrosion performance and mechanisms of Al-Li alloys with and without Li addition.In:Weiland H,Rollett AD,Cassada WA(eds)Proceedings of the 13th international conference on aluminum alloys(ICAA13).The Minerals,Metals and Materials Society(TMS)and Wiley,Hoboken,New Jersey,USA,pp.431-436.

[103]Karabin LM,Bray G H,Rioja R J,et al(2012)Al-Li-Cu-Mg-(Ag)products for lower wing skin applications.In:Weiland H,Rollett A D,Cassada W A(eds)Proceedings of the13th international conference on aluminum alloys(ICAA13).The Minerals,Metals and Materials Society(TMS)and Wiley,Hoboken,New Jersey,USA,pp.529-534.

[104]Boselli J,Denzer D,Karabin L,et al(2014)New aluminum-based thick gauge products for increased fuel efficiency and reduced maintenance cost in next-generation aircraft,25th AeroMat conference and exposition,16-19 June 2014,Orlando,FL 32801,USA.

[105]Warner-Locke J,Moran J,Hull B,et al(2013)The effect of corrosion pitmorphology on SCC and fatigue of 2x99 Alloys compared to 7xxx alloys,‘Research in progress(RIP)symposium extended abstracts',Corrosion conference and expo 2013,National Association of Corrosion Engineers,NACE International,17-21 March 2013,Orlando,FL 32801,USA,NACE International,Houston,TX 77084,USA.

[106]MMPDS-07(2012)Metallic materials properties development and standardization(MMPDS),Battelle Memorial Institute,Columbus,OH 43201,USA.

[107]Davison R M,DeBold T,Johnson MJ(1987)Corrosion of stainless steels.In Metals handbook ninth edition,vol 13,Corrosion.ASM International,Materials Park,OH 44073-0002,USA,pp.547-565.

[108]Outokumpu(2013)Handbook of stainless steel,Outokumpu,Espoo,Finland.www.outokumpu.com/sitecollectiondocuments/outokumpu-stainless-steel-handbook.pdf.

[109]Calle LM,Kolody M R,Vinje R D(2004)Electrochemical impedance spectroscopy of alloys in a simulated Space Shuttle launch environment,NASA Kennedy Space Center,Cocoa Beach,FL 32899,USA:https://ntrs.nasa.gov/search.jsp?R=20120003344.

[110]Tesch A(2013)Stress corrosion cracking tests at ESA—recent highlights,Presentation FCTIM-2013-s2-02-Tesch,Workshop:Technical interchange meeting(TIM)on fracture control of spacecraft,launchers and their payloads and experiments,20-21March 2013,ESA/ESTEC,Noordwijk,The Netherlands.

[111]Ecord G M(1972)Apollo experience report—pressure vessels,NASA Technical Note NASA TN D-6975,National Aeronautics and Space Administration,Washington,DC 20546,USA.

[112]Lane IR C,Morton A G S(1966)Sea-water embrittle ment of titanium.In:Stress-corrosion cracking of titanium,ASTM special technical publication 397.American Society for Testing and Materials,Philadelphia,PA 19103,USA,pp.246-258.

[113]Lane I R,Cavallaro J L(1968)Metallurgical and mechanical aspects of the sea-water stress corrosion of titanium.In:Applications related phenomena in titanium alloys,ASTM special technical publication 432.American Society for Testing and Materials,Philadelphia,PA 19103,USA,pp.147-169.

[114]Feeney J A,Blackburn M J(1971)The status of stress corrosion cracking of titanium alloys in aqueous solutions.In:Scully J C(ed)The theory of stress corrosion cracking in alloys.North Atlantic Treaty Organisation,Scientific Affairs Division,Brussels,Belgium,pp.355-398.

[115]Beck T R(1967)Stress corrosion cracking of titanium alloys,I.Ti:8-1-1 alloy in aqueous solutions.J Electrochem Soc 114(6):551-556.

[116]Fager D N,Spurr W F(1968)Some characteristics of aqueous stress corrosion in titanium alloys.ASM Trans Quart 61:283-292.

[117]Merlin PW(2009)Design and development of the Blackbird:challenges and lessons learned,AIAA Paper2009-1522.In:47th AIAA aerospace sciences meeting including the new horizons forum and aerospace exposition,5-8 January 2009,Orlando,FL 32801,USA.

[118]Bhattacharjee A,Saha B,Williams J C(2017)Titanium alloys:Part 2-alloy development,properties and applications,Chapter 6.In:Eswara Prasad N,Wanhill R J H(eds)Aerospace materials and material technologies,vol1:Aerospace materials.Springer Science+Business Media,Singapore,pp.117-148.

[119]Johnston R L,Johnson R E,Ecord G M,et al(1967)Stress-corrosion cracking of Ti6Al-4V alloy in methanol,NASA Technical Note NASA TN D-3868,National Aeronautics and Space Administration,Washington,DC 20546,USA.

[120]Castner W L,Ecord G M(Undated)Lesson 4:selected Apollo＆Shuttle lessons learned(Part 1),[PPT]Slide—NESC Academy Online—NASA:accessed April 2017 via Google and the search terms‘pressure vesselnitrogen tetroxide apollo space shuttle’.

[121]Kappelt G F,King E J(1967)Observations on the stress corrosion of the 6Al-4V titanium alloy in nitrogen tetroxide.In:Meyer FH Jr(ed)Proceedings of the Air Force Materials Laboratory fiftieth anniversary technical conference on corrosion of military and aerospace equipment,Denver,Colorado,23-25 May 1967,Air Force Materials Laboratory Technical Report AFML-TR-67-329,Wright-Patterson Air Force Base,OH 45433,USA,pp.920-940.

[122]LisagorW B,Manning C R Jr,Bales T T(1968)Stress-corrosion cracking of Ti-6Al-4V titanium alloy in nitrogen tetroxide,NASA Technical Note NASA TN D-4289,National Aeronautics and Space Administration,Washington,DC 20546,USA.

[123]Brownfield C D(1967/8)The stress corrosion of titanium in nitrogen tetroxide,methyl alcohol,and other fluids,Technical Report SD 67-213A,Space Division of North American Rockwell,Downey,CA 90242,USA.

[124]BixlerW D(1972)Flaw growth of6Al-4V STA titanium in nitrogen tetroxide with low nitric oxide content,NASA Contractor Report NASA-CR-160945,National Aeronautics and Space Administration,Washington,DC 20546,USA.

[125]Tiffany C F,Masters JN(1967)Investigation of the flawgrowth characteristics of Ti-6Al4V titanium used in Apollo spacecraft pressure vessels,NASA Contractor Report NASA CR-65586,National Aeronautics and Space Administration,Washington,DC 20546,USA.

[126]Masters JN,HaeseW P,BixlerW D(1969)Fracture and nitrogen tetroxide/sustained load flaw growth of 6Al-4V titanium,NASA Contractor Report NASA-CR-109366,National Aeronautics and Space Administration,Washington,DC 20546,USA.

[127]Boyd JD,Moreland P J,Boyd W K,et al(1970)The effect of composition on the mechanism of stress-corrosion cracking of titanium alloys in N2 O4,and aqueous and hotsalt environments,NASA Contractor Report NASA CR-1525,National Aeronautics and Space Administration,Washington,DC 20546,USA.

[128]Boyd JD,Moreland P J,Boyd W K,et al(1971)The effect of composition on the mechanism of stress-corrosion cracking of titanium alloys in N2O4,and aqueous and hotsalt environments(PartⅡ),NASA Contractor Report NASA CR-1846,National Aeronautics and Space Administration,Washington,DC 20546,USA.

[129]Bjorklund R A(1983)Stress-corrosion crack-growth study of titanium alloy Ti-6Al-4V exposed to Freon PCA and nitrogen tetroxide MON-1,Jet Propulsion Laboratory Report SD-TR-83-53,Jet Propulsion Laboratory,Pasadena,CA 90009,USA.

[130]Wright A C(1976)USAF propellant handbooks,nitricacid/nitrogen tetroxide oxidizers,volⅡ,Air Force Rocket Propulsion Laboratory Technical Report AFRPL-TR-76-76,Air Force Rocket Propulsion Laboratory,Edwards Air Force Base,CA 93523,USA.

[131]MSC Apollo 13 Investigation Team,Panel7(1970)Reaction processes in high pressure fluid systems,NASA Technical Memorandum NASA-TM-X-66919,National Aeronautics and Space Administration,Washington,DC 20546,USA.

[132]Peters M,Kumpfert J,Ward CH,et al(2003)Titanium alloys for aerospace applications,Chapter 13.In:Leyens C,Peters M(eds)Titanium and titanium alloys:fundamentals and applications.Wiley-VCH Verlag GmbH＆Co.KGaA,Weinheim,Germany,pp.333-350.

[133]Tiffany C F(1970)Fracture control of metallic pressure vessels,NASA Special Publication NASA SP-8040,National Aeronautics and Space Administration,Washington,DC 20546,USA.

[134]Chell G G,McClung R C,Kuhlman C J,et al(1999)Guidelines for proof test analysis,NASA Contractor Report NASA/CR-1999-209427,NASA Center for Aerospace Information,Linthicum Heights,MD 21090-2934,USA.

[135]Adenstedt H(1949)Creep of titanium at room temperature.Metal Prog 65:658-660.

[136]Reimann W H(1971)Room temperature creep in Ti-6Al-4V.JMat6(4):926-940.

[137]Zeyfang R,Martin E,Conrad H(1971)Low temperature creep of titanium.Mat Sci Eng8(3):134-140.

[138]Thompson A W,Odegard B C(1973)The influence of micros tructure on low temperature creep of Ti-5Al-2.5Sn.Metall Trans 4(4):899-908.

[139]Odegard B C,Thompson A W(1974)Low temperature creep of Ti-6Al-4V.Metall Trans 5(5):1207-1213.

[140]Imam M A,Gilmore C M(1979)Room temperature creep of Ti-6Al-4V.Metall Trans A 10A(4):419-425.

[141]Paton N E,Thompson A W(1982)Creep of hydrogencharged Ti-5Al-2.5Sn at room temperature.Metall Trans A 13A(8):1531-1532.

[142]Gao G Y,Dexter S C(1987)Effect of hydrogen on creep behavior of Ti-6Al-4V alloy at room temperature.Metall Trans A 18A(6):1125-1130.

[143]Chu H P(1997)Low temperature creep of a titanium alloy Ti-6Al-2Cb-1Ta-0.8Mo,NASA Technical Memorandum NASA TM-104641,NASA Center for Aerospace Information,Linthicum Heights,MD 21090-2934,USA.

[144]Neeraj T,Hiu D-H,Daehn G S,et al(2000)Phenomenological and microstructural analysis of room temperature creep in titanium alloys.Acta Mater 48(6):1225-1238.

[145]Tanaka H,Yamada T,Sato E,et al(2004)Creep behavior in titanium alloys at ambient temperatures.In:Bainum P M,Furong L,Nakajima T(eds)Space activities and cooperation contributing to all Pacific Basin countries:vol 117,Advances in the astronautical sciences.American Astronautical Society,San Diego,CA 92198,USA,pp.649-658.

[146]Aiyangar A K,Neuberger BW,Oberson P G,et al(2005)The effects of stress level and grain size on the ambient temperature creep deformation behavior of an alpha Ti-1.6 wt pct V alloy.Metall Mat Trans A 36A(3):637-644.

[147]Ankem R,Wilt T(2006)A literature review of low temperature(＜0.25Tmp)creep behavior ofα,α-β,andβtitanium alloys,U.S.Nuclear Regulatory Commission Contract NRC-02-02-012,Center for Nuclear Waste Regulatory Analyses,South West Research Institute,San Antonio,TX 78238-5166,USA.

[148]Barkia B,Doquet V,CouziniéJ P,et al(2015)Roomtemperature creep and stress relaxation in commercial purity titanium—influence of the oxygen and hydrogen contents on incubation phenomena and aging-induced rejuvenation of the creep potential.Mater Sci Eng,A 624:79-89.

[149]Yoder GR,Griffis CA,Crooker TW(1974)The cracking of Ti-6Al-4V alloys under sustained load in ambient air.Trans ASME,J Eng Mat Technol,96(Series H,4):268-274.

[150]Williams D N(1974)Subcritical crack growth under sustained load.Metall Trans 5(11):2351-2358.

[151]Meyn D A(1974)Effect of hydrogen on fracture and inertenvironment sustained load cracking resistance ofα-β titanium alloys.Metall Trans 5(11):2405-2414.

[152]Moody N R,Gerberich W W(1980)Hydrogen-induced slow crack growth in Ti-6Al-6V-2Sn.Metall Trans A 11A(6):973-981.

[153]Sastry S M L,Lederich R J,Rath B B(1981)Subcritical crack-growth under sustained load in Ti-6Al-6V-2Sn.Metall Trans A 12A(1):83-94.

[154]Moody N R,Gerberich W W(1982)The effect of stress state on internal hydrogen-induced crack growth in Ti-6Al-6V-2Sn.Metall Trans A 13A(6):1055-1061.

[155]Takatori H,Chiba Y,Ogura T(1992)Effect of microstructure on sustained load cracking behavior of Ti-6Al-4V alloy.Tetsu-To-Hagane 78(5):837-844(partially in Japanese).

[156]Kostrivas A,Smith L S,Gittos M F(2004)Sustained load cracking in titanium alloys.In:Lütjering G,Albrecht J(eds)Ti-2003 science and technology,vol4.Wiley-VCH Verlag GmbH＆Co.KGaA,Weinheim,Germany,pp.2083-2090.

[157]Kostrivas T,Smith L,Gittos M(2005)Sustained load cracking of titanium alloy weldments.In:ASME 24th international conference on offshore mechanics and arctic engineering,vol 3,12-17 June 2005,Halkidiki,Greece.American Society of Mechanical Engineers,New York,NY 10016,USA,pp.221-229.

[158]Somerday B P,Moody N R,Costa JE(1998)Environ mentinduced cracking in structural titanium alloys,Paper no.267,Corrosion 98,NACE International,22-27 March 1998,San Diego,CA 92109,USA.NACE International,Houston,TX 77084,USA.

[159]Lewis JC,Kenny J T(1976)Sustained load crack growthdesign data for Ti-6Al-4V titanium alloy tanks containing hydrazine,AIAA paper 76-769,American Institute of Aeronautics and Astronautics and Society of Automotive Engineers 12th Propulsion Conference,26-29 July 1976,Palo Alto,CA 94301,USA.American Institute of Aeronautics and Astronautics,Reston,VA 2019-5807,USA.

[160]Evans R M(1964)The stress relief of titanium welds for lowtemperature applications,DMIC Technical Note,26 May 1964,Defense Metals Information Center,Battelle Memorial Institute,Columbus,OH 43212,USA.

[161]Kabir A SH,Cao X,Gholipour J,et al(2012)Effect of postweld heat treatment on microstructure,hardness,and tensile properties of laser-welded Ti-6Al-4V.Metall Mat Trans A 43A:4171-4184.

[162]DMIC(1967)Accelerated crack propagation of titanium by methanol,halogenated hydrocarbons,and other solutions,DMIC Memorandum 228,6 March 1967,Defense Metals Information Center,Battelle Memorial Institute,Columbus,OH 43212,USA.

[163]Raymond L,Usell R J(1968)Flaw growth in Ti-6Al-4V in Freon environments,Air Force Report No.SAMSO-TR-69-37,Space and Missile Systems Organization,Air Force Systems Command,Los Angeles Air Force Station,El Segundo,CA 90245,USA.

[164]Dull D L,Raymond L,Usell R J(1969)Alloy compatibility with several cleaning agents,Air Force Report No.SAMSOTR-69-178,Space and Missile Systems Organization,AirForce Systems Command,Los Angeles Air Force Station,El Segundo,CA 90245,USA.

[165]Williamson JG(1969)Stress corrosion cracking of Ti-6Al-4V titanium alloy in various fluids,NASA Technical Memorandum NASA TM X-53971,NASA Center for Aerospace Information,Linthicum Heights,MD 21090-2934,USA.

[166]Lisagor W B(1969)Some factors affecting the stress-corrosion cracking of Ti-6Al-4V alloy in methanol,NASA Technical Note NASA TN D-5557,National Aeronautics and Space Administration,Washington,D.C.20546,USA.

[167]Chen C M,Kirkpatrick H B,Gegel H L(1972)Stress corrosion cracking of titanium alloys in methanolic and other media,Air Force Materials Laboratory Technical Report AFML-TR71-232,Air Force Materials Laboratory,Air Force Systems Command,Wright-Patterson Air Force Base,OH 45433,USA.

[168]Blackburn M J,SmyrlW H,Feeney JA(1972)Titanium alloys.In:Brown BF(ed)Stress-corrosion cracking in high strength steels and in titanium and aluminum alloys.Naval Research Laboratory,Washington,D.C.20375,and U.S.Government Printing Office,Washington,D.C.20402,USA,pp.245-363.

[169]Johnson R E(1967)NASA experience with Ti-6Al-4V in methanol.In:Accelerated crack propagation of titanium by methanol,halogenated hydrocarbons,and other solutions,DMIC Memorandum 228,6 March 1967,Defense MetalsInformation Center,Battelle Memorial Institute,Columbus,OH 43212,USA,pp.2-7.

[170]Sandoz G(1967)Effects of some organics on the stress corrosion susceptibility of some titanium alloys,ibid.,pp.10-15.

[171]Herrigel H R(1967)Titanium U-bends in organic liquids,effect of inhibitors,ibid.,pp.16-19.

[172]Seastrom C C,Gorski R A(1967)The influence of fluorocarbon solvents on titanium alloys,ibid.,pp.20-28.

[173]Sedriks A J(1967)Fracture behavior of titanium alloys in methanol environments,ibid.,pp.43-47.

[174]Hurlich A(1967)Results of some Ti-6Al-4V—methanol experiments at Convair,ibid.,p.54.

[175]Ritchie E,Glessner C(1967)Investigation of stress corrosion of electron-beam-welded and nonwelded Ti-6Al-4V in solutions of methanol and isopropyl alcohol at room temperature”,ibid.,pp.A-2-A-5.

[176]Dietzel W,Müller-Roos J,Heitmann V(2005)An assessment of the SCC susceptibility of Ti6Al-4V in IPA,ESA workshop in stress-corrosion cracking in spacecraft propulsion systems,13 October 2005,European Space Agency ESA-ESTEC,Noordwijk,The Netherlands.

[177]Cao S(2017)The stress-corrosion cracking in Ti-8Al-1Mo-1V,Ph.D.thesis,Department of Materials Science and Engineering,Monash University,Clayton,Victoria 3816,Australia.

[178]O'Brien R(1967)Premature environmental stress crackingof titanium in methanol,Freon,and other solutions.In:Accelerated crack propagation of titanium by methanol,halogenated hydrocarbons,and other solutions,DMIC Memorandum 228,March 6,1967,Defense Metals Information Center,Battelle Memorial Institute,Columbus,OH 43212,USA,pp.8-9.

[179]Sandoz G(1969)Subcritical crack propagation in Ti-8Al-1Mo-1V alloy in organic environments,salt water,and inert environments.In:Staehle R W,Forty A J,Van Rooyen D(eds)Proceedings of conference on fundamental aspects of stress corrosion cracking.National Association of Corrosion Engineers,Houston,TX 77084,USA,pp.684-690.

[180]Craig B(Reviewer)(1994)Technical Note 2:Corrosion*.In:Boyer R,Welsch G,Collings EW(eds)Materials properties handbook:titanium alloys,Fourth printing,August 2007.ASM International,Materials Park,OH 44073-0002,USA,p.1075.