参考文献
[1] Rohanizadeh R,LeGeros R,Fan D. Ultrastructural properties of laserirradiated and heat-treated dentin[J]. J Dent Res,1999,78(12): 1829-1835.
[2] Delmé KI,De Moor RJ. Scanning electron microscopic evaluation of enamel and dentin surfaces after Er: YAG laser preparation and laser conditioning[J]. Photomed Laser Surg,2007,25(5),393-401.
[3] Ceballos L,Toledano M,Osorio R. Bonding to Er-YAG-laser-treated dentin[J]. J Dent Res,2002,81: 119-122.
[4] De Moor,DelmÈ. Erbium lasers and adhesion to tooth structure[J]. J Oral Laser Appl,2006,6: 7-21.
[5] Sassi J,Chimello D,Borsatto M. Comparative study of the dentin/adhesive systems interface after treatment with Er: YAG laser and acid etching using scanning electron microscope[J]. Lasers Surg Med,2004,34: 385-390.
[6] Aranha A,De Paula E,Gutknecht N. Analysis of the interfacial micromorphology of adhesive systems in cavities prepared with Er,Cr:YSGG,Er: YAG laser and bur[J]. Microsc Res Tech,2007,70(8): 745-751.
[7] Kim JH,Kwon OW,Kim HI,et al. Acid resistance of erbium-doped yttrium aluminum garnet laser-treated and phosphoric acid-etched enamels[J].Angle Orthod,2006,76: 1052-1056.
[8] Cardoso MV,de Almeida Neves A,Mine A,et al. Current aspects on bonding effectiveness and stability in adhesive dentistry[J]. Aust Dent J,2011,56: 31-44.
[9] Van Meerbeek B,De Munck J,Yoshida Y,et al. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges[J]. Oper Dent,2003,28: 215-235.
[10]De Munck J,Van Meerbeek B,Yudhira R,et al. Microtensile bond strength of two adhesives to Erbium: YAG-lased vs. bur-cut enamel and dentin[J]. Eur J Oral Sci,2002,110: 322-329.
[11]de Oliveira MT,Arrais CA,Aranha AC,et al. Micromorphology of resin dentin interfaces using one-bottle etch&rinse and self-etching adhesive systems on laser-treated dentin surfaces: a confocal laser scanning microscope analysis[J]. Lasers Surg Med,2010,42: 662-670.
[12]Moretto SG,Azambuja N Jr,Arana-Chavez VE,et al. Effects of ultramorphological changes on adhesion to lased dentin-scanning electron microscopy and transmission electron microscopy analysis[J].Microsc Res Tech,2011,74: 720-726.
[13]Ramos TM,Ramos-Oliveira TM,Moretto SG,et al. Microtensile bond strength analysis of adhesive systems to Er: YAG and Er,Cr: YSGG laser-treated dentin[J]. Lasers Med Sci,2014,29: 565-573.
[14]Tachibana A,Marques MM,Soler JM,et al. Erbium,chromium: yttrium scandium gallium garnet laser for caries removal: influence on bonding of a self-etching adhesive system[J]. Lasers Med Sci,2008,23:435-441.
[15]Cardoso MV,Coutinho E,Ermis RB. Influence of Er,Cr: YSGG laser treatment on the microtensile bond strength of adhesives to dentin[J]. J Adhes Dent,2008,10: 25-33.
[16]Delmé KIM,Cardoso MV,Mine A,et al. TEM examination of the interface between a resin-modified glass-ionomer and Er: YAG laser-irradiated dentin[J]. Photomed Laser Surg,2009,27: 317-323.
[17]Giachetti L,Scaminaci Russo D,Scarpelli F,et al. SEM analysis of dentin treated with the Er: YAG laser: a pilot study of the consequences resulting from laser use on adhesion mechanisms[J]. J Clin Laser Med Surg,2004,22: 35-41.
[18]Bakry AS,Sadr A,Takahashi H,et al. Analysis of Er: YAG lased dentin using attenuated total reflectance Fourier transform infrared and X-ray diffraction techniques[J]. Dent Mater J,2007,26: 422-428.(https://www.daowen.com)
[19]Hossain M,Nakamura Y,Murakami Y,et al. A comparative study on compositional changes and Knoop hardness measurement of the cavity floor prepared by Er: YAG laser irradiation and mechanical bur cavity[J].J Clin Laser Med Surg,2003,21: 29-33.
[20]Jepsen S,Açil Y,Peschel T,et al. Biochemical and morphological analysis of dentin following selective caries removal with fluorescencecontrolled Er: YAG laser[J]. Lasers Surg Med,2008,40: 350-357.
[21]Ari H,Erdemir A. Effects of endodontic irrigation solutions on mineral content of root canal dentin using ICP-AES technique[J]. Journal of Endodontics,2005,31(3): 187-189.
[22]Hossain M,Yamada Y,Nakamura Y. A study on surface roughness and microleakage test in cavities prepared by Er: YAG laser irradiation and etched bur cavities[J]. Lasers Med Sci,2003: 18: 25-31.
[23]Souza A de,Corona S,Palma Dibb R. Influence of Er: YAG laser on tensile bond strength of a self-etching system and a flowable resin in different dentin depths[J]. J Dent,2004,32: 269-275
[24]Armengol V,Jean A,Enkel B. Microleakage of class V composite restorations following Er: YAG and Nd: YAP laser irradiation compared to acid-etch: an in vitro study[J]. Lasers Med Sci. 2002,17: 93-100.
[25]Palma Dibb,Milori Corona S,Borsatto. Assessing microleakage on class V composite resin restorations after Er: YAG laser preparation varying the adhesive systems[J]. J Clin Laser Med Surg. 2002,20: 129-133.
[26]De Oliveira MT,Reis AF,Arrais CA,et al. Analysis of the interfacial micromorphology and bond strength of adhesive systems to Er: YAG laser-irradiated dentin[J]. Lasers Med Sci,2013,28: 1069-1076.
[27]Esteves-Oliveira M,Carvalho WL,Eduardo Cde P. Influence of the additional Er: YAG laser conditioning step on the microleakage of class V restorations[J]. J Biomed Mater Res,2008,87(2): 538-543.
[28]Goncalves M,Corona SA,Borsatto MC. Influence of pulse frequency Er:YAG laser on the tensile bond strength of a composite to dentin[J]. Am J Dent,2005,18(3): 165-167.
[29]Aizawa K,Kameyama A,Kato J. Influence of free-hand vs uniform irradiation on tensile bond strength in Er: YAG-lased dentin[J]. J Adhes Dent,2008,10(4): 295-299.
[30]Monghini EM,Wanderley RL,Pecora JD. Bond strength to dentin of primary teeth irradiated with varying Er: YAG laser energies and SEM examination of the surface morphology[J]. Lasers Surg Med,2004,34(3): 254-259.
[31]Li ZZ,Code JE,Van De Merwe WP. Er: YAG laser ablation of enamel and dentin of human teeth: determination of ablation rates at various fluences and pulse repetition rates[J]. Lasers Surg Med,1992,12(6): 625-630.
[32]Sheth K,Staninec M,Sarma A. Selective targeting of protein,water,and mineral in dentin using UV and IR pulse lasers: the effect on the bond strength to composite restorative materials[J]. Lasers Surg Med,2004,35(4): 245-253.
[33]Koumpia E,Kouros P,Zafifiriadis L. Bonding of adhesives to Er: YAG laser-treated dentin[J]. Eur J Dent,2012,6: 16-23.
[34]Pires P,Ferreira J,Oliveira S. Shear bond strength and SEM morphology evaluation of different dental adhesives to enamel prepared with Er: YAG laser[J]. Contemp Clin Dent,2013,4: 20-26.