参考文献
[1] 杨绍普，曹庆杰，张伟.非线性动力学与控制的若干理论及应用[M].北京：科学出版社，2011.
[2] 黄进，叶尚辉.含摩擦环节伺服系统的分析及控制补偿研究[D].西安：西安电子科技大学，1989.
[3] Armstrong B，Dupont P，Canudas de Wit C.A survey of models，analysis tools and compensation methods for the control of machines with friction[J].Automatica，1994，30（7）：1083-1138.
[4]Claudio G.Comparison of friction models applied to a control valve[J].Control Engineering Practice，2008，16：1231-1243.
[5] 刘丽兰，刘宏昭，吴子英，等.机械系统中摩擦模型的研究进展[J].力学进展，2008，38（2）：201-213.
[6] 刘强，尔联洁，刘金琨.摩擦非线性环节的特性、建模与控制补偿综述[J].系统工程与电子技术，2002，24（11）：45-52.
[7] Bo L C，Pavelescu D.The friction-speed relation and its influence on the critical velocity of the stick-slip motion[J].Wear，1982，82（3）：277-289.
[8] Tustin A.The effects of backlash and of speed dependent friction on the stability of the closed-cycle control systems[J].J Istitution of Electrical Engineering，1947，94（2）：143-151.
[9] Armstrong B.Stick-slip arising from stribeck friction[C].In：Proceedings of IEEE Conference on.Robotics and Automation，Cinxinati，1994，1377-1382.
[10] Hess D P，Soom A.Friction at a lubricated line contact operating at oscillating sliding velocity[J].Journal of Tribology，1990，112（1）：147-152.
[11] Karnopp D.Computer simulation of stick slip friction in the mechanical dynamics systems[J].ASME Journal of Dynamics Systems，Measurement，and Control，1985，107：100-103.
[12] Iurian C.Identification of a system with dry friction[D].Catalunya：University Politenica de Catalunya，2005.
[13] Ravanbod-Shirazi L，Besancon-Voda A.Friction identification using the Karnopp model，applied to an electropneumatic actuator[J].Journal of Systems and Control Engineering，2003，217：123-138.
[14] Polycarpou A，Soom A.Transitions between sticking and slipping at lubricated line contacts，friction-in-duced vibration，chatter，squeal，and chaos[C].In：Proceedings of ASME Winter Annual Meeting，Ana-heim，1992，139-148.
[15] Dahl P R.Solid friction damping of spacecraft vibrations[C].In：Proceedings of AIAA Guidance and con-trol conference，Boston，1975.
[16] Dahl P R.Solid friction damping of mechanical vibrations[C].AIAA，1976，1675-1682.
[17] Bliman P J.Mathematical study of the Dahl’s friction model[J].Europe J Mech A/Solids，1992，11（6）：835-848.
[18] Bohlin T.A case study of grey box identification[J].Automatica，1994，30（2）：307-318.
[19] Rabinowicz E.The nature of static and kinetic coefficients of friction[J].J App Phys，1995，22（11）：1373-1379.
[20] Bliman P A，Sorine M.Friction modeling by hysteresis operators.Application to Dahl，sticktion，and stribeck effects[C].In：Proceedings of Models of hysteresis，Italy，1991，1108-1112.
[21] Bliman P A，Sorine M.Ease-to-use realistic dry friction models for automatic control[C].In：Proceed-ings of the 3 rd European control conference，Italy，1995，3788-3794.
[22] Haessing D A，Friedland B.On the modeling and simulation of friction[J].ASME Journal of Dynamics Sys- tems，Measurement，and Control，1991，113：354-362.
[23] Canudas D W C，OLLSON H，ASTROM K J，et al.A new model for control of systems with friction[J].IEEE Trans.on Automatic Control，1995，40（3）：419-425.
[24] Barabanov N，Ortega R.Necessary and sufficient conditions for passivity of the LuGre model[J].IEEE Trans.on Automatic Control，2000，45（4）：830-832.
[25] Gafvert M.Comparision two friction models[D].France：Laboratoire d’Automatique de Grenoble，1996，19-65.
[26] Olsson H，Astrom K J.Friction model and friction compensation[J].European Journal of Control，1998，4（3）：176-195.
[27] Nitsche R，Gaul L.Smart friction driven systems[J].Smart Mater Struct，2005，14：231-236.
[28] Bona B，Indri M，Smaldone N.Nonlinear friction estimation for digital control of direct-drive manipulators[J].ASME Journal of Applied mechanics，2003，150（2）：171-176.
[29] Swevers J，AL-Blender F，Chris G.An integrated friction model structure with improved presiding behavior for accurae friction compensation[J].IEEE Trans.on Automatic Control，2000，45（4）：675-686.
[30] Iwan W D.A distributed element model for hysteresis and its steady-state dynamic response[J].ASME Journal of Applied mechanics，1966，33（4）：893-900.
[31] Iwan W D.On a class of models for yielding behavior of continuous and composite systems[J].ASME Journal of Applied mechanics，1967，34（3）：612-617.
[32] Lampacrt V，AL-Blender F，Swevers J.A generalized Maxwell-slip friction model appropriate for control purposes[C].In：Proceedings of IEEE Conference on.Robotics and Automation，Washington，2003，1170-1177.
[33] Friedland B，Park YJ.On adaptive friction compensation[J].IEEE Trans on Automatic Control，1992，37（10）：1609-1612.
[34] Yazdizadeh A，Khorasani K.Adaptive friction compensation based on the Lyapunov scheme[C].In Pro-ceedings of the 1996 IEEE International Conference on Control Applications，1996：1060-1065.
[35] Amin J，Friedland B，Harnoy A.Implementation of a friction estimation and compensation technique[C].IEEE Control Systems，1997，71-76.
[36] Huang P Y，Chen Y Y，Chen MS.Position-dependent friction compensation for ballscrew tables[C].In Proceedings of the 1998 IEEE International Conference on Control Applications，1998：863-867.
[37] Tafazoli S，De Silva C W，Lawrence P D.Tracking control of an electrohydraulic manipulator in the presence of friction[J].IEEE Trans.on Control Systems Technology，1998，6：401-411.
[38] Phillips S M，Ballou K R.Friction modeling and compensation for an industrial robot[J].Journal of Robotic Systems，1993，10（7）：947-971.
[39] 扬元凯，郎需英.精密转台中摩擦力矩的动态补偿[J].自动化学报，1983，9（4）：248-252.
[40] Yang Y P，Chu J S.Adaptive velocity control of DC motors with coulomb friction identification[J].ASME Journal of Dynamic Systems，Measurement，and Control，1993，115：95-102.
[41] Weiping L，Cheng X.Adaptive High-precision control ofpositioning tables-theory and experiments[J].IEEE Trans.on Control Systems Technology，1992，2：265-270.
[42] Canudas De Wit C.Robust control for servo-mechanisms under in exact friction compensation[J].Automat-ica，1993，29（30）：757-761.
[43] 张伟英，张友安.非线性观测器用于高精度甚低速系统的动态补偿[J].控制与决策，1989，（1）：35-37.
[44] Canudas de Wit C，Noel P，Brogliato B.Adaptive friction compensation in robot manipulators：low-veloci-ties[J].International Jooural of Robotics Research，1993，10（3）：189-199.
[45] Feemster M，Vedagarbha P，Dawson D M，Haste D.Adaptive control techniques for friction compensation[J].Mechatronics，1999，9：125-145.
[46] Menon K，Krishnamurthy K.Control of low velocity friction and gear backlash in a machine tool feed drive sys-tem[J].Mechatronics，1999，9：33-51.
[47] Cheok KC，Hu H，Loh N K.Modeling and identification of a class of servomechanism systems with Stick-Slip friction[J].ASME Journal of Dynamic Systems，Measurement，and Control，1988，110：324-328.
[48] Craig T J，Lorenz R D.Experimental identification of friction and its compensation in precise，position con-trolled mechanisms[J].IEEE Trans.on Industry Applicatons，1992，28（6）：1392-1398.
[49] Lee S W，KimJ H.Friction identification using evolution strategies and robust control of positioning tables[J].ASME Journal of Dynamic Systems，Measurement，and Control，1999，121：619-624.
[50] Yen J Y，Huang S J.Lu S S.A new compensation for servo systems with position dependent friction[J].ASME Journal of Dynamic Systems，Measurement，and Control，1999，121：612-618.
[51] Walrath C D.Adaptive bearing friction compensation based on recent knowledge of dynamic friction[J].Au-tomatica，1984，20（6）：717-727.
[52] Canudas De Wit C，Lischinsky P.Adaptive friction compensation with partially known dynamic friction model[J].International Journal of Adaptive Control and Signal Processing，1997，11：65-80.
[53] Lischinsky P，Canudas de Wit C，Morel G.Friction compensation for an industrial hydraulic Robot[J].IEEE Control Systems.1999，2：25-232.
[54] Hirschorn R M，Miller G.Control of nonlinear sSystems with friction[J].IEEE Trans.on Control Systems Technology，1999，7（5）：588-595.(https://www.daowen.com)
[55] Vedagarbha P，Dawson D M，Feemster M.Tracking control of mechanical systems in the presence of nonlin-ear dynamic Ffriction Eeffects[J].IEEE Trans.on Control Systems Technology，1999，7（4）：446-456.
[56] Misovec KM，Annaswamy A M.Friction compensation using adaptive nonlinear control with persistent excita-tion[J].International Journal of Control，1999，72（5）：457-479.
[57] Canudas de Wit C，Ge S S.Adaptive friction compensation for systems with generalized velocity/position fric-tion dependency[C].In Proceedings of the 36th Conference on Decision&Control，1997：2465-2470.
[58] Canudas de Wit C，Horowitz R.Observers for tire/road contact Ffriction using only wheel angular velocity in-formation[C].In Proceedings of the 38 th Conference on Decision&Control，1999：3932-3937.
[59] Canudas de Wit C.Control design for ultrasonic motors with dynamic friction interface[C].In the 14th World Congress of IFAC，Beijing，1999：487-491.
[60] Dupont P E.Avoiding stick-slip through PD control[J].IEEE Trans.on Automatic Control，1994，39（5）：1094-1097.
[61] Armstrong B，Neevel D，Kusik T.New result in NPID control：tracking，integral control，friction compensa-tion and experimental result[C].In Proceedings of the 1999 IEEE International Conference on Robotics&Automation，1999：837-842.
[62] Lee S，Meerkov S M.Generalized dither[J].IEEE Trans.on Information Theory，1991，37（1）：50-56.
[63] Horowitz L，Oidak S，Shapiro A.Extensions of dithered feedback systems[J].International Journal of Con-trol，1991，54（1）：83-109.
[64] Yang S，Tomizuka M.Adaptive pulse width control for precise positioning under influence of sticktion and cou-lomb Friciton[J].ASME Journal of Dynamic Systems，Measurement，and Control，1988，110（3）：221-227.
[65] Armstrong B.Control of machines with friction[M].Norwell，Kluwer Academic Publishers，1991.
[66] Luh J Y S，Fisher WD，Paul R P C.Joint torque control by a derect feedback for industrial robots[J].IEEE Trans.on Automatic Control，1983，28（2）：153-161.
[67] Morel G，Iagnemma K，Dubowsky S.The precise control of manipulators with high joint-friction using base force/torque sensing[J].Automatica，2000，36：931-941.
[68] Tesfaye A，Lee H S，Tomizuka M.A sensitivity optimization approach to design of a observer in digital motion control systems[J].IEEE/ASME Trans.on Mechatronics，2000，5（1）：322-38.
[69] White M T，Tomizuka M，Smith C.Improved track following in magnetic disk drives using a disturbance ob-server[J].IEEE/ASME Transactions onMechatronics，2000，5（1）：3-11.
[70] Ro P I，Shim W，Jeong S.Robust friction compensation for submicrometer positioning and tracking for a ball-screw-driven slide system[J].Precision Engineering，2000，24：160-173.
[71] Lee H S，Tomizuka M.Robust motion controller design for high-accuracy positioning systems[J].IEEE Trans.on Control Systems Technology，1996，43（1）：48-55.
[72] Taghirad H D，Belanger P R.Robust friction compensation for harmonic drive transmission[C].In Proceed-ings of the 1998 IEEE International Conference on Control Applications，1998：547-551.
[73] Seungrohk O，Hassan K K.Nolinear output-feedback tracking using high-gain observer and variable struc-ture control[J].Automatica，1999，33（10）：1845-1856.
[74] 陈义武.离散滑动模态控制方法在转台中的应用[D].北京：北京航空航天大学，1998.
[75] Southward S C，Radcliffe CJ，MacCluer C R.Robust nonlinear stick-slip friction compensation[J].ASME Journal of Dynamic Systems，Measurement，and Control，1991，113：639-645.
[76] Kang M S.Robust digital friction compensation[J].Control Engineering Practice，1998，6（3）：359-367.
[77] Young KD.A variable structure control appraoch to friction force compensation[C].In Proceedings of the American Control Conference，1998：3138-3142.
[78] Sivakumar S，Farshad K.Model independent friction compensation[C].In Proceedings of the American Control Conference，1998：463-466.
[79] Korondi P，Young D，Hashimoto H.Sliding bode based disturbance observer for motion control[C].In Pro-ceedings of the 37th IEEE Conference on Decision&Control，1998：1926-1928.
[80] Opart G.Compensation and estimation of friction by using extended Kalman filter，SICE-ICASE International Joint Conference，2006，5032-5035.
[81] Hara S，Yamamoto Y，Omata T，Nakano M.Repetive control system：a new type servo system for periodic exogenous signals[J].IEEE Trans.on Automatic Control，1988，33（7）：659-668.
[82] Tung E D，Anwar G，Tomizuka M.Low velocity friction compensation and feedforward solution based on re-petitive control[J].ASME Journal of Dynamic Systems，Measurement，and Control，1993，115：279-284.
[83] Cho S I，Ha I J.A learning approach to tracking in mehcanical systems with friction[J].IEEE Trans.on Automatic Control，2000，45（1）：111-116.
[84] 陈永生.重复控制方法在伺服系统中的应用研究[D].北京：北京航空航天大学，1999.
[85] 贾亮.具有重复控制的高精度系统跟踪控制系统的研究和应用[D].北京：北京航空航天大学，1997.
[86] 胡恒章，冯幼田，邓志东.自学习控制在转台控制中的应用[J].宇航学报，1992（4）：73277.
[87] Selmic R，Lewis F L.Neural network approximation of piecewise continuous functions：application to friction compensation[C].In Proceedings of the 12th IEEE International Symposium on Intelligent Control，1997：227-232.
[88] Rastko R S，Lewis F L.Deadzone compensation in motion control systems using neural networks[J].IEEE Trans.on Automatic Control，2000，45（4）：602-613.
[89] Larsen GA，Cetinkunt S，Donmez A.CMAC neural network control for high precision motion control in the presence of large friction[J].ASME Journalof Dynamic Systems，Measurement，and Control，1995，117：415-420.
[90] Lee S I，KimJ H.CMAC network-based robust controller for systems with friction[C].In Proceedings of the 34th Conference on Decision&Control，1995：2938-2939.
[91] 黄进，叶尚辉.基于CMAC网络的摩擦补偿研究[J].中国机械工程，1999，10（3）：269-272.
[92] Du H L，Nair S S.Modeling and compensation of low-velocity friction with bounds[J].IEEE Trans.on Control Systems Technology，1999，7（1）：110-121.
[93] Kim Y H，Lewis F L.Reinforcement adaptive learning neural network based friction compensation for high speed and precision[C].In Proceedings of the 37th IEEE Conference on Decision&Control，1998：1064-1069.
[94] Yongfu Wang，Dianhui Wang，Tianyou Chai.Active control of friction self-excited vibration using neuro-fuzzy and data mining techniques[J].Expert Systems with Applications，2013，40（4）：975-983.
[95] Sidi E YO，Sicard P，Massicotte D，et al.Adaptive high precision position control for a flexible joint with friction and parameter uncertainties using neural networks[J].In IEEE on Electrical and Computer Engi-neering，1998：325-328.
[96] Seidl D R，Lam S L，Putman J A，Lorenz R D.Neural network compensation of gear backlash hysteresis in po-sition-controlled mechanisms[J].IEEE Trans.on Industry Applications，1995，31（6）：1475-1483.
[97] Bose B M.Expert system，fuzzy Logic，and neural network applications in power electronics and montion con-trol[J].In Proceedings of IEEE，1994，82（8）：1303-1323.
[98] Teeter J T，ChowM Y，Jame J.A novel fuzzy friction compensation approach to improve the performance of a DC motor control system[J].IEEE Trans.on Industrial Electronics，1996，43（1）：113-120.
[99] Tzes A，Peng P Y，Guthy J.Genetic-based fuzzy clustering for DC-Motor friction identification and com-pensation[J].IEEE Trans.on Control Systems Technology，1998，6（1）：462-472.
[100] 黄进，叶尚辉，陈其昌.基于自调整量化因子模糊控制器的摩擦补偿研究[J].机械设计与研究，1999（1）：27-29.
[101] Kovacic Z，Bogdan S，Balenovic M.A model reference&sensitivity model-based self-learning fuzzy Log-ic controller as a solution for control of nonlinear servo systems[J].IEEE Trans.on Energy Conversion，1999，14（4）：1479-1484.
[102] Yongfu Wang，Dianhui Wang，Tianyou Chai.State estimate-based robust adaptive control of a linked mass-spring system with nonlinear friction[J].ASME Journal of Dynamic Systems，Measurement and Control，2013，135（2）：251-259.
[103] Yongfu Wang，Dianhui Wang，Tianyou Chai.Extraction and adaptation of fuzzy rules for friction modeling and control compensation[J].IEEE Trans.On Fuzzy Systems，2011，180（2）：5029-5040.
[104] Yongfu Wang，Dianhui Wang，Tianyou Chai.Modeling and control compensation of nonlinear friction using aadaptive fuzzy systems[J].Mechanical System and Signal Processing，2009，23（8）：2445-2457.
[105] 王永富，张义民，柴天佑.一类不确定机械系统的双调节自适应模糊建模与鲁棒控制研究[J].机械工程学报，2013，49（9）：61-68.
[106] LIN C L，LEE G Y.Hierarchical fuzzy control for C-aAxis of CNC turning centers using genetic algorithms，Journal of Intelligent and Robotic Systems，1999，25（3）：255-275.
[107] Lib C L，LIN J Y.Fuzzy-enhanced adaptive control for flexible drive system with friction using genetic algo-rithms，1998，23（2-4）：379-405.
[108] Liaw C D，Huang T J.Contact friction compensation for robots using genetic learning algorithms，Journal of Intelligem and Robotic Systems，1998，23（2-4）：331-349.
