成果附录
附录1 代表性论文目录
[1] Mao X, Cao W. Prediction of hypersonic boundary layer transition on sharp wedge f low considering variable specif ic heat [J]. Applied Mathematics and Mechanics, 2014, 35(2):143-154.
[2] Sun C H. Physical implication of two problems in transition prediction of boundary layers based on linear stability theory [J]. Science China: Physics, Mechanics & Astronomy, 2014,57(5): 950-962.
[3] 张永明， 周恒. PSE在超音速边界层二次失稳问题中的应用[J]. 应用数学和力学，2008， 29（1）： 1-7.
[4] 张永明， 周恒. PSE在可压缩边界层转捩问题中的应用[J]. 应用数学和力学， 2008，29（7）： 757-763.
[5] 董明， 周恒. 超声速钝锥湍流边界层DNS入口边界条件的研究[J]. 应用数学和力学，2008， 29（8）： 893-904.
[6] 苏彩虹， 周恒. 超音速和高超音速有攻角圆锥边界层的转捩预测[J]. 中国科学： 物理学力学天文学， 2009， 39（6）： 874-882.
[7] 曹伟. 高超声速边界层的转捩问题[J]. 空气动力学学报， 2009， 27（5）： 516-523.
[8] 董明， 周恒. 高超声速湍流边界层中由高温引起的变比热效应及其计算[J]. 中国科学： 物理学力学天文学， 2010， 40（11）： 1431-1440.
[9] 董明， 周恒. 高超音速湍流边界层气动热计算中湍流模式的改进[J]. 中国科学： 物理学力学天文学， 2010， 40（2）： 231-241.
[10] 董明， 张永明， 周恒. 计算可压缩边界层转捩及湍流的一种新方法——PSE+DNS[J].应用数学和力学， 2008， 29（12）： 1387-1394.
[11] L eng J S, Lan X, Liu Y J, et al. Shape-memory polymers and their composites: Stimulus methods and applications [J]. Progress in Materials Science, 2011, 56(7): 1077-1135.
[12] Chen Y J, Sun J, Liu Y J, et al. Experiment and analysis of f luidic f lexible matrix composite((FMC)-M-2) tube [J]. Journal of Intelligent Material Systems and Structures, 2012, 23(3):279-290.
[13] 陈钱， 尹维龙， 白鹏， 等. 变后掠变展长翼身组合体系统设计与特性分析[J]. 航空学报， 2010， 31（3）： 506-513.
[14] 杨文超， 杨剑挺， 王进， 等. 变弯度机翼准定常流动分离特性的实验研究[J]. 中国科学： 物理学力学天文学， 2012， 42（5）： 531-537.
[15] 董二宝， 许昊， 李永新， 等. 单曲柄双摇杆机构同步性能优化[J]. 机械工程学报，2010， 46（7）： 22-26.
[16] 徐国武， 白鹏， 石文. 二维翼型可变形方案初步研究[J]. 力学季刊， 2011， 32（4）：570-576.
[17] 陈钱， 白鹏， 李锋. 飞行器变后掠过程非定常气动特性形成机理[J]. 力学学报， 2013，45（3）： 307-313.
[18] 陈钱， 白鹏， 尹维龙. 飞机外翼段大尺度剪切式变后掠设计与分析[J]. 空气动力学学报， 2012， 31（1）： 40-46.
[19] 尹维龙. 关节式准柔性后缘翼型的气动特性分析[J]. 哈尔滨工业大学学报， 2010，42（1）： 1758-1761.
[20] 白鹏， 陈钱， 刘欣煜， 等. 滑动蒙皮变后掠气动力非定常滞回与线性模型[J]. 力学学报， 2011， 43（6）： 1020-1029.
[21] 李素循. 近空间飞行器的气动复合控制原理及研究进展[J]. 力学进展， 2009， 39（6）：740-755.
[22] 刘耀峰， 薄靖龙. 侧向喷流干扰流场建立与消退过程数值模拟[J]. 宇航学报， 2015，36（8）： 877-894.
[23] 李素循. 吉林陨石熔壳结构的观测[C]//第九届全国实验流体力学学术会议， 杭州，2013.
[24] 李素循， 师军， 郭孝国. 高速流绕平板边界层特性研究[J]. 气体物理， 2016， 1（6）： 1-4.
[25] Z hao L, Zhao X J, Li S X. Fluctuating pressure inside/outside the f low separation region in high speed f low f ield [J]. Journal of Aerospace Science and Technology, 2015, 1:18-26.
[26] L i S X, Guo X G. Blunt f in induced shock wave/lam inar and transition boundary layer interaction in hypersonic flow [C]// The 13th Asian Congress of Fluid M echanics,Bangladesh, 2010.
[27] L i S X, Wang K, Ni Z Y. The visualization of three-dimension shock wave structure in hypersonic f low using schlieren photography and laser vapor screen technique [C]// The 11th Asian Symposium on Visualization, Japan, 2011.
[28] Ma J K, Li S X, Guo X G. Visualization of unsteady laminar separated f low induced by a swept blunt f in [C]// The 12th Asian Symposium of Visualization, Taiwan, 2013.
[29] Li S X. Visualization in super/hypersonic f low [C]// The 12th Asian Symposium of Visualization,Taiwan, 2013.
[30] Ma J K, Li S X. Heat f lux measurement in separated f low f ield induced by a swept blunt f in [C]// 4th International Conference on Experimental Fluid Mechanics, Beijing, 2014.
[31] Wang Z H, Bao L, Tong B G. Theoretical modeling of chemical nonequilibrium stagnation point boundary layer heat transfer under raref ied conditions [J]. Science China: Physics,Mechanics & Astronomy, 2013, 56(5): 866-874.
[32] Wang Z H, Bao L, Tong B G. An analytical study on nonequilibrium dissociating gas f low behind a strong bow shockwave under rarefied conditions [J]. Science China: Physics,Mechanics & Astronomy, 2013, 56(4): 671-679.
[33] Wang Z H, Lin B, Tong B G. Rarefaction criterion and non-Fourier heat transfer in hypersonic raref ied f lows [J]. Physics of Fluids, 2010, 22(12): 1-7.
[34] Chen X X, Wang Z H, Yu Y L. Nonlinear shear and heat transfer in hypersonic raref ied f lows past f lat plates [J]. AIAA Journal, 2015, 53(2): 413-420.
[35] Wang Z H, Lin B, Tong B G. Variation character of stagnation point heat f lux for hypersonic pointed bodies from continuum to raref ied f low states and its bridge function study [J].Science China: Physics, Mechanics & Astronomy, 2009, 52(12): 2007-2015.
[36] Li B M, Bao L, Tong B B. Physical criterion study on forward stagnation point heat f lux CFD computations at hypersonic speeds [J]. Applied Mathematics and Mechanics, 2010,31(7): 839-850.
[37] Chen H, Bao L. Mechanics of unsteady aerodynamic heating w ith sudden change in surface temperature [J]. Applied Mathematics and Mechanics, 2009, 30(2): 163-174.
[38] Wang Z H, Bao L, Tong B G. Theoretical modeling of the chemical non-equilibrium f low behind a normal shock wave [J]. AIAA Journal, 2012, 50(2): 494-499.
[39] Wang Z H. Theoretical Modelling of Aeroheating on Sharpened Noses Under Raref ied Gas Effects and Nonequilibrium Real Gas Effects [M]. Berlin: Springer Theses, 2015.
[40] 王智慧， 鲍麟. 具有局部稀薄气体效应的高超声速尖锥气动加热特征研究[J]. 计算物理， 2010， 27（1）： 59-64.
[41] Liu X L, Zhang S H, Zhang H X, et al. A new class of central compact schemes w ith spectral-like resolution II: Hybrid weighted nonlinear schemes [J]. Journal of Computational Physics, 2015, 284: 133-154.
[42] Liu X L, Zhang S H, Zhang H X, et al. A new class of central compact schemes w ith spectral-like resolution I: Linear schemes [J]. Journal of Computational Physics, 2013,248: 235-256.
[43] Zhang L P, Chang X H, Duan X P, et al. Applications of dynam ic hybrid grid method for three-dimensional moving/deform ing boundary problems [J]. Computers & Fluids, 2012,62: 45-63.
[44] Zhang S H, Li H, Liu X L, et al. Classif ication and sound generation of two-dimensional interaction of two Taylor vortices [J]. Physics of Fluids, 2013, 25(5): 1-34.
[45] Zhang S H, Deng X G, Mao M L, et al. Improvement of convergence to steady state solutions of Euler equations w ith weighted compact nonlinear schemes [J]. Acta Mathematicae Applicatae Sinica, 2013, 29(3): 449-464.
[46] Zhang L P, Zhao Z, Chang X H, et al. A 3D hybrid grid generation technique and a multigrid/parallel algorithm based on anisotropic agglomeration approach [J]. Chinese Journal of Aeronautics, 2013, 26(1): 47-62.
[47] Sun D, Li Q, Zhang H X. Detached-eddy simulations on massively separated f lows over a 76/40°double-delta w ing [J]. Aerospace Science and Technology, 2013, 30(1): 33-45.
[48] Li Q, Sun D, Zhang H X. Detached-eddy simulations and analyses on new vortical f lows over a 76/40° double delta w ing [J]. Science China: Physics, Mechanics & Astronomy,2013, 56(6): 1062-1073.
[49] Zhang S H, Jiang S F, Shu C W. Improvement of convergence to steady state solutions of Euler equations w ith the WENO schemes [J]. Journal of Scientif ic Computing, 2011,47(2): 216-238.
[50] 张来平， 马戎， 常兴华， 等. 虚拟飞行中气动、运动和控制耦合的数值模拟技术[J].力学进展， 2014， 44： 376-417.
[51] Yuan Y M, Zhang T C, Yao W, et al. Study on f lame stabilization in a dual-mode combustor using optical measurements [J]. Journal of Propulsion and Power, 2015, 31(6): 1524-1532.
[52] Li L, Wang J, Fan X J. Development of integrated high temperature sensor for simultaneous measurement of wall heat flux and temperature [J]. Review of Scientific Instruments,2012, 83(7): 1-11.
[53] Zhang T C, Wang J, Fan X J. Combustion of vaporized kerosene in supersonic model combustors w ith dislocated dual cavities [J]. Journal of Propulsion and Power, 2014,30(5): 1152-1161.
[54] 俞刚， 范学军. 超声速燃烧与高超声速推进[J]. 力学进展， 2013， 43（5）： 449-471.
[55] 袁越明， 杨猛， 张泰昌， 等. 脉冲纹影技术及其在超声速燃烧室流场显示中的应用[J].推进技术， 2013， 34（1）： 42-46.
[56] 王新竹， 张泰昌， 陆阳， 等. 主动冷却燃烧室燃烧与传热耦合过程迭代分析设计方法[J].推进技术， 2014， 35（2）： 214-220.
[57] 李晓鹏， 张泰昌， 齐力， 等. 超声速燃烧中的特征尺度及影响因素[J]. 航空动力学报，2013， 28（7）： 1458-1466.
[58] 李龙， 范学军， 王晶. 高温壁面热流与温度一体化测量传感器研究[J]. 实验流体力学，2012， 26（1）： 93-99.
[59] 王振国， 杨揖心， 梁剑寒， 等. 超声速气流中稳焰凹腔吹熄极限分析与建模[J]. 技术科学， 2014， 44（9）： 961-972.
[60] Zhang T C, Wang J, Li Q, et al. Blowout lim its of cavity-stabilized f lame of supercritical kerosene in supersonic combustors [J]. Journal of Propulsion and Power, 2014, 30(5):1161-1167.
[61] Zhang C H, Li B, Rao B, et al. A shock tube study of the autoignition characteristics of RP-3 jet fuel [J]. Science Direct, 2015, 35: 3151-3158.
[62] W ang Q D, Fang Y M, Wang F, et al. Skeletal mechanism generation for high-temperature oxidation of kerosene surrogates [J]. Combustion and Flame, 2012, 159(1): 91-102.
[63] Cheng X M, Wang Q D, Li J Q, et al. ReaxFF molecular dynamics simulations of oxidation of toluene at high temperatures [J]. Journal of Physical Chemistry A, 2012, 116(40):9811-9818.
[64] Wang Q D, Wang J B, Li J Q, et al. Reactive molecular dynamics simulation and chemical kinetic modeling of pyrolysis and combustion of n-dodecane [J]. Combustion and Flame,2011, 158(2): 217-226.
[65] Xiong S Z, Yao Q, Li Z R, et al. Reaction of ketenyl radical w ith hydroxyl radical over C2H2O2potential energy surface: A theoretical study [J]. Combustion and Flame, 2014,161(4): 885-897.
[66] Lia A K, Jiao Y, Li S H, et al. Flux projection tree method for mechanism reduction [J].Energy & Fuels, 2014, 28(8): 5426-5433.
[67] Rao F, Li B, Li P, et al. Shock-tube study of the ignition of gas-phase 1,3,5- trimethylbenzene in air [J]. Energy & Fuels, 2014, 28(11): 6707-6713.
[68] Z hang C H, Li P, Li Y L, et al. Shock-tube study of dimethoxymethane ignition at high temperatures [J]. Energy & Fuels, 2014, 28(7): 4603-4610.
[69] Gong C M, Ning H B, Xu J Q, et al. Experimental and modeling study of thermal and catalytic cracking of n-decane [J]. Journal of Analytical and Applied Pyrolysis, 2014,110: 1-37.
[70] Guo J J, Wang J B, Hua X X, et al. Mechanism construction and simulation for high-temperature combustion of n-propylcyclohexane [J]. Chem ical Research in Chinese Universities, 2014, 30(3): 480-488.
[71] Wang H B, Qin L, Sun M B, et al. A hybrid LES (Large Eddy Simulation)/assumed sub-grid PDF (Probability Density Function) model for supersonic turbulent combustion [J]. Science China: Technological Sciences, 2011, 54(10): 2694-2707.
[72] Sun M B, Gong C, Zhang S H, et al. Spark ignition process in a scram jet combustor fueled by hydrogen and equipped w ith multi-cavities at Mach 4 f light condition [J]. Experimental Thermal and Fluid Science, 2012, 43: 90-96.
[73] Han X, Zhou J, Lin Z Y, et al. Def lagration-to-detonation transition induced by hot jets in a supersonic prem ixed airstream [J]. Chinese Physics Letters, 2013, 30(5): 1-3.
[74] H an X, Zhou J, Lin Z Y. Experimental investigations of detonation initiation by hot jets in supersonic prem ixed f lows [J]. Chinese Physics B, 2012, 21(12): 1-5.
[75] W ang H B, Qin L, Sun M, et al. A dynam ic pressure-sink method for improving large eddy simulation and hybrid Reynolds-averaged Navier-Stokes-large eddy simulation of wall-bounded f low s [J]. Journal of Aerospace Engineering, 2012, 226(9): 1107-1120.
[76] S un M B, Lei J, Wu H Y, et al. Flow patterns and mixing characteristics of gaseous fuel multiple injections in a non-reacting supersonic combustor [J]. Heat and Mass Transfer,2011, 47(11): 1499-1516.
[77] L iang J H, Cai X D, Li Z Y, et al. Effects of a hot jet on detonation initiation and propagation in supersonic combustible mixtures [J]. Acta Astronautica, 2014, 105(1): 265-277.
[78] Cai X D, Liang J H, Lin Z Y, et al. Parametric study of detonation initiation using a hot jet in supersonic combustible mixtures [J]. Aerospace Science and Technology, 2014, 39:442-455.
[79] Cai X D, Liang J H, Lin Z Y, et al. Adaptive mesh ref inement based numerical simulation of detonation initiation in supersonic combustible mixtures using a hot jet [J]. Journal of Aerospace Engineering, 2015, 28(1): 1-36.
[80] Cai X D, Liang J H, Lin Z Y, et al. Detonation initiation and propagation in nonuniform supersonic combustible mixtures [J]. Combustion Science and Technology, 2015, 187(4):525-536.
[81] 向有志， 张堃元， 王磊， 等. 壁面压升可控的高超轴对称进气道优化设计[J]. 航空动力学报， 2011， 26（10）： 2193-2199.
[82] 张林， 张堃元， 王磊， 等. 高超弯曲激波二维进气道初步研究[J]. 航空动力学报， 2011，26（11）： 2556-2562.
[83] 南向军， 张堃元， 金志光. 基于反正切曲线压升规律设计高超内收缩进气道[J]. 航空动力学报， 2016， 26（11）： 2571-2577.
[84] 苏纬仪， 张新宇， 张堃元. 洛仑兹力控制高超声速进气道边界层分离的数值模拟[J].推进技术， 2011， 32（1）： 36-41.
[85] 苏纬仪， 张堃元， 金志光. 高超声速进气道附面层分离无源被动控制[J]. 推进技术，2011， 32（4）： 455-450.
[86] 苏纬仪， 张堃元， 金志光. 基于遗传算法的高超声速曲面压缩进气道反设计[J].推进技术， 2011， 32（5）： 601-605.
[87] 南向军， 张堃元， 金志光， 等. 矩形转圆形高超声速内收缩进气道数值及试验研究[J].航空学报， 2011， 32（6）： 988-996.
[88] 苏纬仪， 张堃元， 金志光. 一种抑制激波-边界层相互作用的新型无源被动控制[J].空气动力学报， 2011， 29（6）： 738-743.
[89] 刘凯礼， 张堃元. 二元高超声速进气道动态攻角特性风洞实验[J]. 推进技术， 2012，33（1）： 14-19.
[90] 南向军， 张堃元. 采用新型基准流场的高超声速内收缩进气道性能分析[J]. 宇航学报，2012， 33（2）： 254-259.
[91] Wang X H, Wang J Z. Partial integrated m issile guidance and control w ith f inite time convergence [J]. Journal of Guidance, Control and Dynamics, 2013, 36(5): 1399-1411.
[92] Cui L, Yang Y. Disturbance rejection and robust least-squares control allocation in f light control system [J]. Journal of Guidance, Control and Dynamics, 2011, 34(6): 1632-1645.
[93] Duan Z S, Huang L, Yao Y, et al. On the effects of redundant control inputs [J]. Automatica,2012, 48(9): 2168-2174.
[94] Wei Q K, Niu Z G, Chen B, et al. Bang-bang control applied in airfoil roll control w ith plasma actuators [J]. Journal of Aircraft, 2013, 50(2): 670-677.
[95] Song Lei, Yang J Y. An improved approach to robust stability analysis and controller synthesis for LPV systems [J]. International Journal of Robust and Nonlinear Control,2011, 21(13): 1574-1586.
[96] 黄琳， 段志生， 杨剑影. 近空间高超声速飞行器对控制科学的挑战[J]. 控制理论与应用， 2011， 28（10）： 1496-1505.
[97] 陈琛， 王鑫， 闫杰. 升力体构型高超声速飞行器模态稳定性分析[J]. 西北工业大学学报， 2010， 28（3）： 327-331.
[98] 闫斌斌， 孟中杰， 王鑫， 等. 抑制高超声速飞行器级间分离气动干扰的预置舵偏设计方法[J]. 西北工业大学学报， 2011， 29（5）： 757-760.
[99] 张辉， 王鑫， 李杰， 等. 升力体构型高超声速飞行器气动特性分析[J]. 飞行力学， 2013，31（2）： 118-122.
[100] 孟中杰， 闫杰. 弹性高超声速飞行器建模及精细姿态控制[J]. 宇航学报， 2011，32（8）： 1683-1687.
[101] 孟中杰， 闫杰. 高超声速弹性飞行器振动模态自适应抑制技术[J]. 宇航学报， 2011，32（10）： 2164-2168.
[102] 谭毅龙， 闫杰. 针对高超声速飞行器的非线性动态逆最优控制[J]. 导弹与航天运载技术， 2011（1）： 36-39.
[103] 宋磊， 杨剑影， 段志生. 多模型切换系统H∞鲁棒控制器的设计与应用[J]. 控制理论与应用， 2010， 27（11）： 1531-1536.
[104] Song L, Yang J Y. Smooth sw itching output tracking control for LPV systems [J]. Asian Journal of Control, 2012, 14(6): 1710-1716.
[105] Zhao Y Y, Yang J Y, Wen G H. H∞control for uncertain sw itched nonlinear singular systems w ith time delay [J]. Nonlinear Dynamics, 2013, 74(3): 649-665.
[106] Zhang Y, Song J S, Ren Z. Neural network dynamic inversion w ith application to reentry process of a hypersonic vehicle [C]// International Conference on Advanced Computational Intelligence, Nanjing, 2012.
[107] Song J H, Liu H T, Ren Z. Self-regulation controller design based on disturbance estimation for reusable launch vehicle [C]// International Conference on Automatic Control and Artif icial Intelligence, Xiamen, 2012.
[108] Song J H, Ren Z, Shen Z. Self-regulation control scheme for reusable launch vehicle reentry attitude control [C]// International Conference on Advanced Computational Intelligence,Nanjing, 2012.
[109] Peng J, Qu X, Ren Z. Fuzzy sliding mode control design for reusable launch vehicles [C]//International Conference on Advanced Computational Intelligence, Nanjing, 2012.
[110] 雷正东， 杨剑影， 赵阳阳. 基于挠性吸气式高超声速飞行器的传感器容错控制[J].航空兵器， 2012（2）： 3-9.
[111] 张臻， 王玉坤， 毛剑琴. 基于模糊树逆方法的高超飞行器变质心控制[J]. 信息科学，2012， 42（11）： 1379-1390.
[112] Zhang Z, Chen Q W, Mao J Q. Generalized Prandtl-Ishlinskii model for rate-dependent hysteresis-modeling and its inverse compensation for giant magnetostrictive actuator [C]//Proceeding of the 31st Chinese Control Conference, Hefei, 2012.
[113] Zhang W, Zhang Z, Mao J Q, et al. Modeling and control of rate-dependent hysteresis based on Hammerstein-like system by using fuzzy tree method [C]// Proceeding of the 31st Chinese Control Conference, Hefei, 2012.
[114] Wu Z G, Yang C. A new approach for aeroelastic robust stability analysis [J]. Chinese Journal of Aeronautics, 2008, 21(5): 417-422.
[115] Zhang X T, Wu Z G, Yang C. New f lutter-suppression method for a m issile f in w ith an actuator [J]. Journal of Aircraft, 2013, 50(3): 989-995.
[116] Yang C, Yang Y X, Wu Z G. Shape sensitivity analysis of f lutter characteristics of a low aspect ratio supersonic w ing using analytical method [J]. Science China: Technological Sciences, 2012, 55(12): 3370-3377.
[117] Wan Z Q, Liang L, Yang C. Method of the jig shape design for a f lexible w ing [J]. Journal of Aircraft, 2014, 51(1): 327-331.
[118] Wan Z Q, Wang Y K, Liu Y Z, et al. A high-eff iciency aerothermoelastic analysis method [J].Science China: Physics, Mechanics & Astronomy, 2014, 57(6): 1111-1118.
[119] Wu Z Z, Yang N, Yang C. Identif ication of nonlinear multi-degree-of freedom structures based on Hilbert transformation [J]. Science China: Physics, Mechanics & Astronomy, 2014,57(9): 1725-1736.
[120] Wan Z Q, Zhang B C, Du Z L, et al. Aeroelastic two-level optim ization for prelim inary design of w ing structures considering robust constraints [J]. Chinese Journal of Aeronautics,2014, 27(2): 259-265.
[121] 吴志刚， 樊龙飞， 杨超， 等. 推力耦合的高超声速飞行器气动伺服弹性研究[J].航空学报， 2012， 33（8）： 1355-1363.
[122] 许云涛， 吴志刚， 杨超. 地面颤振模拟试验中的非定常气动力模拟[J]. 航空学报，2012， 33（11）： 1947-1957.
[123] Shao K, Wu Z G, Yang C. Analysis and f lexible structural modeling for oscillating w ing utilizing aeroelasticity [J]. Chinese Journal of Aeronautics, 2008, 21(5): 402-410.
[124] S un S P, Cao D Q, Han Q K. Vibration studies of rotating cylindrical shells w ith arbitrary edges using characteristic orthogonal polynom ials in the Rayleigh-Ritz method [J].International Journal of Mechanical Sciences, 2013, 68: 180-189.
[125] Z hao H, Cao D Q. A study on the aero-elastic f ultter of stiffened laminated composite panel in the supersonic f low [J]. Journal of Sound and Vibration, 2013, 332(19): 4668-4679.
[126] C ao D Q, Zhao N. Active control of supersonic/hypersonic aeroelastic flutter for a two-dimensional airfoil w ith f lap [J]. Technological Sciences, 2011, 54(8): 1943-1953.
[127] Guo H L, Chen Y S. Supercritical and subcritical Hopf bifurcation and limit cycle oscillations of an airfoil with cubic nonlinearity in supersonic [J]. Nonlinear Dynamics, 2012, 67(4):2637-2649.
[128] 赵海， 曹登庆， 龙钢. 基于动态吸振器的高超声速复合材料壁板颤振抑制及其优化设计[J]. 航空动力学报， 2013， 23（10）： 2202-2208.
[129] L in L, Cao D Q, Sun S P. Vibration analysis for rotating ring-stiffened cylindrical shells w ith arbitrary boundary conditions [J]. Journal of Vibration and Acoustics, 2013,135(6): 1-12.
[130] 孙述鹏， 曹登庆， 初世明. 转动薄壁圆柱壳行波振动响应分析[J]. 振动工程学报，2013， 26（3）： 459-466.
[131] C ao D Q, Song M T, Tucker R W, et al. Dynamic equations of thermoelastic Cosserat rods [J]. Communications in Nonlinear Science and Numerical Simulation, 2013, 18(7):1880-1887.
[132] S un S P, Cao D Q, Chu S M. Free vibration analysis of thin rotating cylindrical shells using wave propagation approach [J]. Archive of Applied Mechanics, 2013, 83(4): 521-531.
[133] Chen H, Feng X, Huang Y, et al. Experiments and viscoelastic analysis of peel test w ith patterned strips for applications to transfer printing [J]. Journal of the Mechanics and Physics of Solids, 2013, 61(8): 1737-1752.
[134] Dong X L, Feng X, Hwang K C, et al. Full-f ield measurement of nonuniform stresses of thin f ilms at high temperature [J]. Optics Express, 2011, 19(14): 13201-13208.
[135] D ong X L, Feng X, Hwang K C. Oxidation stress evolution and relaxation of oxide f ilm/metal substrate system [J]. Journal of Applied Physics, 2012, 112(2): 1-6.
[136] D ong, X L, Fang X F, Feng X. Diffusion and Stress Coupling Effect during Oxidation at High Temperature [J]. Journal of the American Ceramic Society, 2013, 96(1): 44-46.
[137] Ruan J L, Feng X, Zhang G B, et al. Dynam ic thermoelastic analysis of a slab using finite integral transformation method [J]. AIAA Journal, 2010, 48(8): 1833-1839.
[138] Huang Y, Feng X, Qu B. Slippage toughness measurement of soft interface between stiff thin films and elastomeric substrate [J]. Review of Scientific Instruments, 2011,82(10): 1-4.
[139] Jiang D J, Feng X, Qu B, et al. Rate-dependent interaction between thin films and interfaces during micro/nanoscale transfer printing [J]. Soft Matter, 2012, 8(2): 418-423.
[140] Wang Y, Feng X, Lu B W, et al. Surface effects on the mechanical behavior of buckled thin film [J]. Journal of Applied Mechanics, 2013, 80(2): 1-9.
[141] Wang Y, Feng X. Dynamic behaviors of controllably buckled thin films [J]. Applied Physics Letters, 2009, 95(23): 1-3.
[142] Dong X L, Feng X, Hwang K C. Non-uniform stress distribution and deformation bifurcation of thin film/substrate system subjected to gradient temperature [J]. Thin Solid Films, 2011,519(8): 2464-2469.
[143] Zhao D, Zhang C R, Hu H F, et al. Ablation behavior and mechanism of 3D C/ZrC composite in oxyacetylene torch environment [J]. Composites Science and Technology,2011, 71(11): 1392-1396.
[144] Chen S A. Mechanism of ablation of 3D C/ZrC-SiC composite under an oxyacetylene flame [J]. Corrosion Science, 2013, 68: 168-175.
[145] Zhao D. Preparation and characterization of three-dimensional carbon fiber reinforced zirconium carbide composite by precursor infiltration and pyrolysis process [J]. Ceramics International, 2011, 37(7): 2089-2093.
[146] Zhao D, Hu H F, Zhang C R. A simple way to prepare precursors for zirconium carbide [J].Journal of Materials Science & Technology, 2010, 45(23): 6401-6405.
[147] Hu H F, Wang Q K, Chen Z H, et al. Preparation and characterization of C/SiC-ZrB2composites by precursor infiltration and pyrolysis process [J]. Ceramics International,2010, 36(3): 1011-1016.
[148] Li L L, Wang Y G, Cheng L F, et al. Preparation and properties of 2D C/SiC-ZrB2-TaC composites [J]. Ceramics International, 2011, 37(3): 891-896.
[149] Chen S A, Zhang C R, Zhang Y D, et al. Preparation and properties of carbon fiber reinforced ZrC-ZrB2based composites via reactive melt infiltration [J]. Composites: Part B, 2014,60: 222-226.
[150] Chen S A. Effects of SiC interphase by chemical vapor deposition on the properties of C/ZrC composite prepared via precursor infiltration and pyrolysis routet [J]. Materials &Design, 2013, 46: 497-502.
[151] Chen S A. Effects of polymer derived SiC interphase on the properties of C/ZrC composites [J].Materials & Design, 2014, 58: 102-107.
[152] Zhao D, Zhang C R, Hu H F, et al. Effect of SiC on the oxidation resistance performance of C/ZrC composite prepared by polymer inf iltration and pyrolysis process [J]. Materials Science Forum, 2011, 675-677: 415-418.
[153] Song F, Meng S H, Xu X H, et al. Enhanced thermal shock resistance of ceram ics through biom imetically inspired nanof ins [J]. Physical Review Letters, 2010, 104(12):1-4.
[154] Shao Y F, Xu X H, Meng S H, et al. Crack patterns in ceramic plates after quenching [J].Journal of the American Ceram ic Society, 2010, 93(10): 3006-3008.
[155] Liu Q N, Song F, Meng S H, et al. Universal Biot number determining stress duration and susceptibility of ceram ic cylinders to quenching [J]. Philosophical Magazine, 2010,90(13): 1725-1732.
[156] Song F, Liu Q N, Meng S H, et al. A universal Biot number determining the susceptibility of ceramics to quenching [J]. Europhysics Letters, 2009, 87(5): 1-3.
[157] Liu Q N, Meng S H, Jiang C P, et al. Critical Biot’s number for determ ination of the sensitivity of spherical ceramics to thermal shock [J]. Chinese Physics Letters, 2010,27(8): 1-4.
[158] Zhang Z P, Shao Y F, Song F. Characteristics of crack patterns controlling the retained strength of ceram ics after thermal shock [J]. Frontiers of Materials Science in China,2010, 4(3): 251-254.
[159] Xu S L, Cai Y W, Cheng G D. Volume preserving nonlinear density filter based on heaviside functions [J]. Structural Multidisciplinary Optimization, 2010, 41(4): 495-505.
[160] Niu B, Yan J, Cheng G D. Optimum structure with homogeneous optimum cellular material for maximum fundamental frequency [J]. Structural Multidisciplinary Optimization, 2009,39(2): 115-132.
[161] Wang B, Yan J, Cheng G D. Optimal structure design with low thermal directional expansion and high stiffness [J]. Engineering Optim ization, 2011, 43(6): 581-595.
[162] Fan H L, Fang D N, Chen L M, et al. Manufacturing and testing of a CFRC sandw ich cylinder w ith Kagome cores [J]. Composites Science and Technology, 2009, 69(15-16):2695-2700.
[163] Hao P, Wang B, Li G. Surrogate-based optimum design for stiffened shells w ith adaptive sampling [J]. AIAA Journal, 2012, 50(11): 2389-2410.
[164] Zhou P, Wu C W. Liquid water transport mechanism in the gas diffusion layer [J]. Journal of Power Sources, 2010, 195(5): 1408-1415.
[165] Yuan G M, Li X K, Dong Z J, et al. Graphite blocks w ith preferred orientation and high thermal Conductivity [J]. Carbon, 2012, 50(1): 175-182.
[166] Yuan G M, Li X K, Dong Z J, et al. The structure and properties of ribbon-shaped carbon f ibers w ith high orientation [J]. Carbon, 2014, 68: 426-439.
[167] Yuan G M, Li X K, Dong Z J, et al. Pitch-based ribbon-shaped carbon-f iber-reinforced one-dimensional carbon/carbon composites w ith ultrahigh thermal conductivity [J].Carbon, 2014, 68: 413-425.
[168] Zhang X, Dong Z J, Huang Q, et al. Preparation of zirconium diboride powders by co-pyrolysis of a zirconium-containing organic precursor and polyborazine using a solution based method [J]. Ceramics International, 2014, 40(9): 15207-15214.
[169] Dong Z J, Liu S X, Li X K, et al. Inf luence of inf iltration temperature on the microstructure and oxidation behavior of SiC-ZrC ceramic coating on C/C composites prepared by reactive melt inf iltration [J]. Ceramics International, 2015, 41(1): 797-811.
[170] Dong Z J, Zhang X, Huang Q, et al. Synthesis and pyrolysis behavior of a soluble polymer precursor for ultra-f ine zirconium carbide powders [J]. Ceram ics International,2015, 41(6): 7359-7365.
[171] 袁观明， 李轩科， 董志军， 等. 沥青基高取向带状炭纤维的制备及表征[J]. 无机材料学报， 2011， 26（10）： 1025-1030.
[172] 林剑锋， 袁观明， 李轩科， 等. 一维高导热C/C复合材料的制备研究[J]. 无机材料学报， 2013， 28（12）： 1338-1344.
[173] 熊小庆， 袁观明， 李轩科， 等. 不同晶体取向中间相沥青基带状炭纤维的制备与表征[J].无机材料学报， 2014， 29（11）： 1186-1192.
[174] 袁观明， 李轩科， 董志军， 等. 高导热中间相沥青基炭纤维的微观结构分析[J]. 功能材料， 2011， 42（10）： 1806-1809.
[175] Pan B, Li K, Tong W, Fast. Robust and accurate digital image correlation calculation w ithout redundant computations [J]. Experimental Mechanics, 2013, 53(7): 1277-1289.
[176] Yu L P, Pan B. The errors in digital image correlation due to overmatched shape functions [J].Measurement Science and Technology, 2015, 26(4): 1-8.
[177] Huang X F, Liu Z L, Xie H M. Recent progress in residual stress measurement techniques [J].Acta Mechanica Solida Sinica, 2013, 26(6): 570-583.
[178] Li G, Zhang C, Hu H, et al. Preparation and mechanical properties of C/SiC nuts and bolts [J]. Materials Science & Engineering A, 2012, 547(15): 1-5.
[179] Jin H, Meng S, Zhu Y, et al. Effect of environment atmosphere on thermal shock resistance of the ZrB2-SiC-graphite composite [J]. Materials & Design, 2013, 50: 509-514.
[180] Qi F, Meng S, Guo H. Repeated thermal shock behavior of the ZrB2-SiC-ZrC ultrahigh-temperature ceram ic [J]. Materials & Design, 2012, 35: 133-137.
[181] Zhou Z, Song F, Shao Y, et al. Characteristics of the surface heat transfer coeff icient for Al2O3ceramic in water quench [J]. Journal of the European Ceramic Society, 2012,32(12): 3029-3034.
[182] Hu P, Gui K X, Dong S, Zhang X H. Effect of SiC content on the ablation and oxidation behavior of ZrB2-based ultra high temperature ceram ic composites [J]. Materials, 2013,6(5): 1730-1744.
[183] Xu B S, Hong C Q, Qu Q, et al. Preparation of a multi-composition coating for oxidation protection of modified carbon-bonded carbon fiber composites by a rapid sintering method [J]. Surface and Coatings Technology, 2015, 270: 109-116.
[184] Li G, Zhang Y, Zhang C, et al. Design, preparation and properties of online-joints of C/SiC-C/SiC w ith pins [J]. Composites Part B: Engineering, 2013, 48: 134-139.
附录2 代表性发明专利
“近空间飞行器的关键基础科学问题”代表性发明专利一览表
续表
续表
附录3 获得国家科学技术奖励项目
“近空间飞行器的关键基础科学问题”获得国家科学技术奖励项目一览表
续表
