附录2
COMPASS
中国船级社上海规范研究所
静水力计算
SRH10（Ver.0201）
标 识：
船 名：郑和宝船
图 号：WUT801-100-06
签 名：
日 期：
主要参数
垂线间长：106.669 m
型 宽： 48.000 m
型 深： 16.000 m
设计吃水：8.000 m
设计纵倾：0.000 m
单位定义
长度单位：米［m］
重量单位：吨［t］
角度单位：度［deg］
坐标轴定义
X轴：向右为正
Y轴：向首为正
Z轴：向上为正
纵倾：尾倾为正
横倾：右倾为正
PEFERENCES
DEFINITION OFGLOBAL ORIGIN：
OUTPUT REFERENCE POINT（RFP），DISTANCE FROM GLOBAL ORIGIN：
DRAUGHT EXTREME（AT Lbp/2 AB/OVE RFP）
ABBREVIATIONS
1 DRAUGHT EXTREME：Extreme draught at midships.
2 DRAUGHT RFP：Draught above output reference point at midships.
3 DISPL TOTAL SW：Total displacement in seavater.
4 DISOL TOTAL FW：Total displacement in freshrater.
5 DISPL MLD：Moulded volume of displacement.
6 LCF FWD OF RFP：Long. centre of flotation forward of output reference point
7 TCF STB OF RFP：Transv. centre of flotation to atarboard of output reference point
8 LCB FWD OF RFP：Long. centre of buoyancy forward of output reference point.
9 TCB STB OF RFP：Transv. centre of buoyancy to starboard of output reference point
10 VCB ABOVE RFP：Vert. centre of buoyancy above output reference point.
11 HMT：Position of transverse metacentre above output reference point.
12 HML：Position of longitudinal metacentre above output reference point.
13 IT：Transv. moment of inertia about neutral axis.
14 IL/1000：Long. moment of inertia about neutral axis.（Div. by 1000）
17 TPM SW：Force to change draught one cm in seawater.
18 VPDT：Volumetric increase per degree trim about output reference point.
19 VPDH：Volumetric increase per degree heel about output reference point.
20 DPDT SW：Increase in displacement per degree trim about output reference point.
21 DPDH SW：Increase in displacement per degree heel about output reference point.
22 WPA：Waterplant area.
23 WETSURF：Projected wetted surface.
24 CB：Block coefficient=Displacement moulded/（Lbp*Draught（RFP）*Br. mld）
25 CP：Prismatic coefficient=CB/CM
26 CM：Max section coefficient=Area at max section/（Draught（RFP）*Br. mld）
27 CW：Waterplant area coefficient=Water plane area/（Lbp*Br. mld）
28 DISPL TOTAL SW：As item 3 for various trim values.
29 KMT：As item 11 for various trim values.
30 LCB FWD OF RFP：As item 8 for various trim values.
（续表）
（续表）
（续表）
（续表）
