本章参考文献

［1］周济，周艳红.数控加工技术［M］.北京：国防工业出版社，2002.

［2］刘雄伟，等.数控加工理论与编程技术［M］.2版.北京：机械工业出版社，2003.

［3］张定华，罗明，吴宝海，等.智能加工技术的发展与应用［J］.航空制造技术，2010（21）：40-43.

［4］M'SAOUBI R，AXINTE D，SOO S L，et al.High performance cutting of advanced aerospace alloys and composite materials［J］.CIRP Annals-Manufacturing Technology，2015，64（2）：557-580.

［5］CUI D，ZHANG D H，WU B H，et al.An investigation of tool temperature in end milling considering the flank wear effect［J］.International Journal of Mechanical Sciences，2017，131-132：613-624.

［6］HOU Y F，ZHANG D H，WU B H，et al.Milling force modeling of worn tool and tool flank wear recognition in end milling［J］.IEEE/ASME Transactions on Mechatronics，2015，20（3）：1024-1035.

［7］ZHOU X，ZHANG D H，LUO M，et al.Toolpath dependent chatter suppression in multi-axis milling of hollow fan blades with ball-end cutter［J］.The International Journal of Advanced Manufacturing Technology，2014，72（5-8）：643-651.

［8］WANG J R，LUO M，XU K，et al.Generation of tool-life-prolonging and chatter-free efficient toolpath for five-axis milling of freeform surfaces［J］.Journal of Manufacturing Science and Engineering，2019，141（3）：1-15.

［9］LUO M，LUO H，ZHANG DH，et al.Improving tool life in multi-axis milling of Ni-based superalloy with ball-end cutter based on the active cutting edge shift strategy［J］.Journal of Materials Processing Technology，2018，252：105-115.

［10］LUO M，LUO H，AXINTE D，et al.A wireless instrumented milling cutter system with embedded PVDF sensors［J］.Mechanical Systems and Signal Processing，2018，110：556-568.